Is the grout reviver better than grout pens? Yes, I much prefer using grout reviver to freshen up tile grout than grout pens for the following reasons… Grout pens can be tricky to use as the liquid can dry up and then come rushing out at once.
Old Credit Card or Plastic Card: A stiff plastic card can be a good substitute for a grout float. Use the edge to spread the grout evenly and push it into the joints. Paint Scraper: A paint scraper or any flat-edged tool can work well for applying grout, allowing you to spread it into the joints.
This really works! The grouting around the tiles in our kitchen and bathroom was looking very tried with several black damp spots. The grout pen covered it all in one coat and was very simple and quick to use. We added an extra coat on the very stained sections and now it all looks like fresh grouting.
However, caulk is usually a better choice in areas where moisture will accumulate, thanks to its flexibility. Caulk is also much easier to clean. While it is porous, it doesn't absorb dirt as much as grout does.
The Pro-Kleen Grout Cleaner is the best grout cleaner on the market. It will blast away even the toughest grout stains and leave your tired grout looking like new, with minimal hands-on time from you. It's not the cheapest on our list, but it'll go the distance.
Professionals often use steam to loosen the dirt and other particles trapped in the grout without needing to scrub manually. While every steam cleaning machine is different, you'll follow this basic process to clean grout lines: Use a steam cleaner with a small nylon brush attachment.
For floors, steam mops are highly effective for cleaning grout. Just like the handheld steam cleaner we tested, a steam mop can clean and sanitize your tile and grout without resorting to harsh chemicals.
Jim Whitfield, manager of Technical Services at Mapei told industry professionals, “Because epoxy grout is so tough, it wears extremely well. It doesn't wear down over time and become a tile gutter—like cement grout can—where all the dirt and liquid and junk collects.”
Remember the tip on avoiding bleach, ammonia, and other harsh chemicals to clean grout. It would be best if you also avoided vigorous scrubbing. A rough brush and too much elbow grease will remove the dirt, but it could also remove the grout. Another way to prevent grout damage is to use a squeegee on shower walls.
Acidic Cleaners
Cleaners that have a high chemical pH or are acidic will begin to eat away at your grout and make it more fragile and porous. Stay away from cleaners that contain vinegar and citrus. This will eat away at the top layer of the grout and cause the need for replacing grout lines sooner.
You can seal the grout after using the grout pen, but don't try to use the grout pen after sealing the grout. Both the grout pen and seal rely on a porous surface to adhere.
Here's a few DIY grout cleaners you can try: Make a spreadable paste with 3/4 cup baking soda with 1/4 cup hydrogen peroxide and 1 tablespoon of mild dish soap. Add more baking soda or peroxide if the mixture is too runny or thick.
Grout pens will only temporarily cover your grout's discoloration. That's probably why they are the cheapest option available. We run into the infamous grout pen issue nearly every other week. The project usually goes awry when the homeowner applies the grout pen to the grout and some bleeds over onto the tile.
Grout Float: A reliable grout float is your go-to tool for packing the grout into the joint. Make sure you have one on hand for precise application.
It does work well, however some reviewers suggest it is not always successful at removing offending stains from the grout itself.
Toothpaste works so well for cleaning rough surfaces like grout because of its thick consistency.
Grout is porous and usually sealed to resist stains. However, acid can degrade these silicone-based sealants, causing them to break down and wash away. Contrary to popular belief, this can happen with just one application of vinegar.
If you're trying to clean grimy grout between your bathroom shower or floor tiles, then OxiClean™ bathroom cleaners are here to help! They get rid of grout stains on vertical and floor tiles for a refreshed bathroom.
Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout. Hydrogen peroxide and baking soda produce oxygenated bleach, which is highly effective for cleaning grout.
There are several key characteristics that make epoxy grout not only an alternative to cement grout, but a much better choice than cement grout. Most importantly, epoxy grout is strong and durable. It is highly resistant to stains, cracks, chemicals, harsh weather conditions, and climate changes.
Our unique technology allows for the complete dispersion of water during mixing and slaking. WDT helps make these grout products stronger and denser than ever before, providing 20% stronger* grout joints and up to 30% higher stain resistance*.
Epoxy grouts are the most durable of all grout choices because they are resistant to stains and water damage, and will hold up against harsh cleaners (please don't use harsh acidic cleaners on our tile!).
If you're a die-hard DIYer, using Dawn dish soap alone can be a safer option for mild cleaning. Dilute a small amount of Dawn in warm water, scrub the grout with a soft brush, and rinse thoroughly. However, this method is less effective for tackling stubborn stains or deep-seated grime.
Final Verdict. Our favorite grout cleaner is the Black Diamond Ultimate Grout Cleaner Spray for Tile with Brush. It can be used to lift various household messes and stains on many surface types. We also love that it comes with a firm-bristled scrub brush.