For a standard pull-through sharpener, pull the blade through the coarse slot 5 to 10 times to reset the edge. Then, switch to the fine (ceramic) slot and pull it through 2 to 5 times to polish it. Always use light, even pressure to avoid removing too much metal.
For a standard pull-through sharpener, pull the blade through the coarse slot 3 to 6 times, applying only light, even pressure. Then, finish by pulling it through the fine or honing slot 1 to 3 times to polish the edge and smooth out any burrs.
Pull-through sharpeners are not universally "bad," but they are generally discouraged for high-quality or expensive knives. They offer quick, convenient edge maintenance but are highly aggressive, removing excess metal and often leaving a fragile, jagged edge.
Rule #1: It is important to use a knife adapted to what you want to do / food you want to prepare. For example, you shouldn't use a bread knife to slice a roast or use the blade of a paring knife and use it as a screwdriver (don't laugh, we've all done it!) Rule #2: Don't drop your knife on the floor.
We recommend 6–8 pulls through the sharpener (tip up). If you need that extra degree of sharpness, polish the edge with a few strokes back and forth. Let the sharp edge glide across the smooth flat surfaces of the sharpener with no more downward pressure than the weight of the knife.
Here are the most common mistakes and proven ways to avoid them:
Cutting boards made of glass, granite, ceramic, or your dinner plate may look stylish or convenient, but they are the fastest way to destroy a knife's edge. These surfaces are harder than your knife's steel. So every time your blade contacts them, it suffers microscopic edge deformation, chipping, or even rolling.
In the high-end folding knife community, the original "Holy Trinity" refers to three legendary American makers who pioneered the modern premium tactical folder. Together, their designs set the gold standard for durability and precision.
In most places, including across the U.S., it is not illegal to carry a standard, non-locking Swiss Army Knife. Because they generally have small blades (under 3 inches) and require two hands to open, they are classified as legal pocket knives rather than prohibited weapons.
Never soak knives with wooden handles in water; prolonged exposure can damage the handle and rivets. Knives with plastic handles and without rivets can be soaked for longer periods without issue.
In the sharpening phase, we do not recommend any current WD-40® Brand Products although some may be used later for storage & protection. For sharpening stones the lubrication can come from water or oil.
The "best" knife sharpener ultimately depends on your knives, skill level, and budget. For an intuitive, mess-free experience that produces a razor-sharp edge with zero skill, the Work Sharp Rolling Knife Sharpener is the best overall. If you prefer professional, guided systems, the Wicked Edge Gen 4 is unmatched.
For most kitchens, you only need three foundational knives to handle 95% of prep work: a Chef's Knife, a Paring Knife, and a Serrated (Bread) Knife. These three powerhouses can tackle anything from dicing onions and slicing crusty bread to peeling fruits and carving small meats.
Pull-through sharpeners are the most popular way to sharpen knives, and with good reason: They are quicker than whetstones and more precise than sharpening steels. However, they shed the most amount of metal, which weakens the durability of knives.
Yes, it is absolutely worth sharpening cheap knives. Even budget or entry-level blades can get razor-sharp. A cheap knife that is kept sharp is significantly safer and more effective in the kitchen than a dull, expensive knife.
A honing rod realigns the microscopic teeth of the blade that become misaligned during regular use. Chefs frequently use honing rods before and after cutting tasks to keep their knives sharp.
Choose a high-quality knife oil specifically designed for pocket knives. Avoid using household oils like WD-40, as they can attract and stick more dirt in your pivot, ultimately leading to more significant problems.
Too much pressure on one side of the blade might result in dents and uneven sharpening. In contrast, being overly light-handed may not produce the desired effects. Remember that mild and continuous pressure, as well as keeping a consistent angle, are key.
It will chip, dull, and corrode your knives, including a high probability of causing pitting corrosion—a particularly nasty, localized form of corrosion.
Except for plastic or round bladed butter knives. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors. The final decision rests with the TSA officer on whether an item is allowed through the checkpoint.
There is no single "best" steel for knives because the ideal choice depends on your primary need: edge retention, corrosion resistance, or toughness. Today, a few exceptional steels stand out as the top performers in different categories:
Possessing a weapon: the maximum sentence for possession offences is four years' custody. If the offender has committed the same offence before or another relevant offence such as threatening with an offensive weapon in a public place, they will face a minimum sentence of at least six months' custody.
John Wick famously wields a signature series of high-end, out-the-front (OTF) automatic knives in his movies. The specific knives vary depending on the film, transitioning from production models by Microtech Knives in the first three movies to a highly exclusive custom blade in the fourth.
Truly the leader of the pack, the okapi locking folder (KO9070) is renowned with its crescent moons and three star inlays and ring. The distinct ratcheting sound when opening and closing is as much its trademark as its signature look. So Notorious is this knife, that it has found its way in songs found in reggae music.
In ancient Egyptian mythology, Maahes (also spelled Maches or Mahes) is known as the god of war, protection, and knives. Often depicted as a lion-headed man wielding a knife, he was revered as "Lord of the Slaughter" and protector of the innocent.