30 inches- Used for single basin sinks. 33 inches- Used for offset sinks, or double basin sinks. 36 inches- Used for double basin sinks. 42 inches- This is the largest width in a base cabinet.
Base cabinet size
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
A 33" cabinet is outside measurement. Figure 3/4" wall thickness, so the inside measurement of the cabinet is 31½". You can possible squeeze the sink in there. It will be difficult to get at the side clips.
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly.
Base cabinets are usually shorter than sink base cabinets, and they don't have a built-in sink. Sink base cabinets, on the other hand, are designed to accommodate a kitchen sink. They're also often deeper than base cabinets, giving you more storage space for larger items.
Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size.
A 33" cabinet will only fit a 30" sink.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches.
Buttrick recommends a sink that is at least 27 inches long, 19 inches wide, and 7.25 inches deep. “Once you factor in the three-quarter-inch counter depth, the sink is eight inches deep,” he says. Similar-size models are also available commercially.
If you frequently use large pans or baking trays, it might be worth getting a sink with an extra wide or extra deep bowl – or even a 1½ / double bowl. If you don't have a dishwasher in your kitchen, make sure you get a sink with a built-in drainer, so you have enough space to let items dry after you hand wash them.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
Never Place a Full-Height Cabinet Above the Sink
We strongly recommend that a full-height IKEA cabinet above the sink must have an open space that's at least 12”(H) and 30”(W). The reasons why are two-fold. First, it's pretty awful to work over a sink with a full cabinet inches away from your face.
Besides, in order to avoid backsplash spots at the bottom of the upper cabinet, please leave more space between the upper cabinet and the sink. Usually, the upper cabinets should be at least 12 inches above the sink.
Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.