Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
If your pool is full 8-1-15 and they do NOT do an acid start, you can swim soon. I suggest getting the startup done first acid or Bi-carb, and once done you can swim.
Curing plaster refers to a maturation process of the new plaster finish when it strengthens and seals. The pool finish will start to cure immediately after mixing. Sixty percent of the curing process occurs in the first 4 weeks and will continue over the next 8 to 10 months.
After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it's officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.
Liquid Chlorine: Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower. After Shocking Your Pool: It is safe to swim once your chlorine levels reach 5 ppm or lower, preferably at 3 ppm.
Warning: the images are graphic. According to tattoo guidelines, you're supposed to wait two weeks before swimming in the pool or ocean to allow the ink to heal — up until that point, your tattoo is still an open wound and needs to be cared for like one.
wait at least 14 days before heating the water and monitor chemical balance more closely after you turn on your heater.
Brush the pool twice a day for the first two weeks. This opens the pores of the plaster to allow proper curing as well as removes any loose plaster dust from the surface. You may notice plaster dusting when you brush and the water becomes cloudy. This is normal and will go away with proper treatment and brushing.
At first you'll add chlorine in what's called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.
When opening your pool in the spring – When a pool is first opened, the chlorine level normally needs an immediate boost, and shock is the quickest and easiest way to accomplish this. If the chlorine level is already adquate, a non-chlorine shock may be used to treat the water.
Tips for Adding Start-Up Pool Chemicals
Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.
The fastest way to heat your pool is to use a gas pool heater and a solar cover. It's like heating up your coffee in the microwave and putting a lid on it. No matter how you plan to heat your pool, you should at least have a solar cover (or liquid solar cover) to help you retain the heat.
They usually do an Acid startup on Pebble finishes which takes about 7 days. Thats tough...they usually don't want you swimming in it for the first week. Also, don't know how large your pool is, but it could take 2 days or more to fill the pool up you know.
A pool that is uncovered can lose up to 5 degrees F overnight; a good cover can cut that loss by half. Used at night or whenever your pool is not in use, the pool cover can help save fuel costs by cutting heat loss regardless of the type of heating you utilize.
It is highly recommended that the pool be completely filled with water 24-30 hours or sooner after marbelite application is complete to avoid the finish from drying out. Shrinkage cracks or webbing may occur and will be visibly more apparent or mottled coloured applications if the pool is not filled quickly enough.
Using waterproof plasters and bandages to cover wounds will help to protect them while you swim so that they can heal properly. Before applying a plaster or bandage, it's essential to clean the wound so that you're not trapping any bacteria underneath the plaster or bandage.
A tattoo is, in fact, a 'sore,' when broken down into simplest terms. A needle punctures the skin, leaving behind a plasma film. If that film is soaked in water, it is the same as soaking a scab in the tub. It gets soft, comes off, and leaves scarring.
The most important factor though is the size of the pool. You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.
The month of March is the BEST time to open your swimming pool. If you wait any longer for the temperature to rise higher than 65 degrees algae and other organics will start to grow.
BUT, if you have to shock your pool during the day in broad daylight, you can still swim after adding shock. It's recommended that you wait one hour after adding shock with the filter running, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
The Bottom Line about Pools and Chlorine
As mentioned above, you could probably swim in a pool without chlorine without any major health issues. However, long-term use of a pool lacking chlorinated H2O could make you sick or, at the very least, contribute to rashes and other types of skin irritation.