Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner. While cleaning concrete with bleach or detergent can be effective, it can also be toxic to plants.
Treat the concrete stain with baking soda
Sprinkle a thick layer of baking soda over the oil stain in your driveway. Let it soak in for thirty minutes. Clean the stain by scrubbing it with a bristle brush. Wash away the baking soda with clean water.
Baking Soda: Creates voids and pinholes in the surface. It acts as an accelerator. Veining Compound: Absorbs water from the mix and creates a colored line in the concrete.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Poultice: Create a paste by mixing an acidic solution with a neutralizing agent like baking soda or diatomaceous earth. Apply the paste to the hardened cement, cover it with plastic wrap, and let it sit overnight. Scrub and rinse the area the next day.
While you may think of dish soap only for washing your dishes, it actually works well for keeping your concrete floor clean. Dish soap, when mixed properly, removes all dirt and buildup without leaving behind any film or residue.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
NOTE: Don't use baking soda for cleaning glass surfaces, silverware, stone countertops, and wooden floors or furniture. Also, dermatologists warn against using baking soda routinely as a dry shampoo or underarm deodorant, because its alkalinity will disrupt the natural acidity of skin and scalp.
But common pantry essentials that are often used for cleaning — like baking soda and vinegar — shouldn't be mixed either. Unlike the bleach-ammonia mixture, combining soda and vinegar won't hurt anyone — but don't expect the mixture to do a good job cleaning, either.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Shake some baking soda onto the surface, let it sit for 15 minutes, and vacuum to remove the baking soda and the odors it has absorbed. For a fragrance boost, add a few drops of your favorite essential oil to the baking soda before you sprinkle it on.
Vinegar can be applied directly or in a 1:1 ratio with water. In the case of bicarbonate soda, dissolve 1 to 5 tablespoons in 10 litres of water, depending on the degree of soiling. The mixture must now soak in for 15 to 20 minutes. The patio is then cleaned with a scrubber and finally rinsed with clean water.
1. Best Overall Concrete Cleaner—ZEP Purple Pressure Wash. Zep concrete cleaner has several great products, and the ZEP Purple Pressure Wash outdoor cleaner is no exception. This alkaline cleaner is low foaming and easy to rinse from the concrete surface.
Concrete Acid Stains are the only true stains with permanent results.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
If your area is more prone to algae and mold, then you may want to wash your concrete more often. You should pressure wash your concrete at least once a year to protect your concrete and the value of your home. Using a concrete sealer can also prevent damage to your concrete after it has been washed.
The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals. Powdered peroxide-based formulas are generally high-performance alkaline, tile and grout cleaners and degreasers that are made for use on heavy-duty concrete.
Try using equal parts lemon juice and white vinegar. This creates a similar acidic solution that could lift your rust stains. For instance, you might use 1 part cleaning product with 10 parts water.
Product description. OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout.
The 1600-WHITE series of water-based, white-pigmented concrete curing compounds are wax-based dispersions with selected white pigments. When properly applied, 1600-WHITE forms a premium-grade membrane, which optimizes water retention.