But if the doors are smooth (not slick) to the touch, you can likely skip the sanding step, as long as you do a few bits of prep first! If you don't want to sand before you prime, use some mineral spirits and a rough sponge to clean and lightly rough up the cabinet area you're painting.
Once your cabinets are clean and dry, use a 100 or 150-grit sandpaper to roughen up the surface of the cabinets. Cabinet paint won't adhere properly to a smooth or shiny surface. You don't need to completely remove the prior finish, just rough up the surface enough to give the primer something to stick to.
Do you need to sand cabinets before painting? Skipping this time-consuming step is a surefire way to lead to a messy finished product. Sanding helps fresh paint adhere to surfaces and will help prevent chipping down the line. It's also better to sand twice (first to remove old paint, then to smooth out the wood).
Use a foam sanding block to scuff the surfaces of the cabinet, drawers, and doors. This is a light sanding meant to give the primer something to adhere to, so don't sand to the bare wood. Use a tack cloth to remove the sanding dust before moving on.
Don't Go Overboard on Sanding
You should sand cabinets before beginning your how to paint kitchen cabinet project to give the new paint a good surface to grip. But you don't need to sand to bare wood. If your cabinets have a factory finish, sand lightly with 120-grit sandpaper or a sanding sponge.
Your best bet is probably an orbital sander. You could hand sand your cabinet, but it will take a lot of elbow grease. You may even want to use both. An orbital sander can make quick work of the bulk of the cabinet door, but a sanding block or sanding sponge can help you cover any grooves or tight spots by hand.
Wood cabinets are ideal for painting, but any surface that can be scuffed with sandpaper can be painted. Laminate cabinets require a special bonding primer. The laminate must be in good condition for best results. A gloss finish will make your cabinets sheen, but it may show a lot of dings or mistakes.
Depending on what kind of primer you're using and the state of the cabinets, you will need 1-2 coats of primer. For many cabinets, one coat is plenty, but if you're uncertain, a second coat won't hurt as long as it's not applied too thick. When it comes to the actual paint, you will need at least two coats.
When it comes to cabinet painting, using a sprayer is the fastest approach and it will also provide that factory-like finish you're aiming for. In fact, you can paint each side of your cabinet doors or drawers in just a few seconds and then move onto the next, cutting down on the timeframe for completion dramatically.
Oil-based primers are the best primers for kitchen cabinets. Existing cabinets almost always have a smooth painted finish or lacquered finish that is difficult for paint to adhere to. Oil-based Primer is the glue that provides a good base for the first coat of paint.
Sand your cabinets
Painted cabinets should get a thorough sanding with 120-grit paper, but no matter the finish, do a final pass with 220-grit. Use a sanding sponge to dig into any tough areas that need special attention or corners that are hard to get with your sander.
For your finish to be vibrant and not dull sanding after primer will ensure that the finish is not excessively dulled when you apply your paint top coat. You will typically use finer grit sandpaper and aim to achieve a smooth wood finish so that you get a fine appearing wood finish when you apply your topcoat.
But if the doors are smooth (not slick) to the touch, you can likely skip the sanding step, as long as you do a few bits of prep first! If you don't want to sand before you prime, use some mineral spirits and a rough sponge to clean and lightly rough up the cabinet area you're painting.
Sanding a surface removes the top glossy layer, allowing the substance to receive the primer. Without sanding the surface in advance, the new coat of paint won't stick to the previous layer.
LIGHTLY SAND THE CABINETS AGAIN
The primer coat tends to go on thick and can sometimes pool, so this step smooths the surface. Once the primer is completely dry which is usually 24 hours, use 220 grit sandpaper to lightly sand all surfaces (front and back).
Just as it does with makeup and on cars, primer creates a smooth base that promotes better adhesion and truer color from your topcoat paint. Pro-tip: Apply primer using a brush first to “cut in" around edges, then use a roller to fill in. That's how the pro's do it.
Over time, fluctuating temperatures and humidity levels can make paint peel. For spaces where this is normal, like kitchens, using KILZ 3® Premium Primer, known for its exceptional adhesion and durability, before you paint can help ensure your paint job lasts longer.
In short, you will typically need 2 coats of primer for most painting projects. Apply primer liberally and allow to dry fully before applying your final coat of interior paint. To get more painting advice for your next painting projects, click the link below.
You certainly don't want to skimp on the number of coatings you apply to your cabinets, but you also don't want to go overboard. Slapping on too many coats of primer or paint during cabinet refinishing can hinder adherence, interfere with proper drying, and result in strange lines and patterns on the finished surface.
A: In order to get a factory finish look on cabinets when you paint them yourself, you will actually use both a brush and a roller. However, the majority of the painting will be done with a roller. Specifically, a foam roller with give you the smoothest finish when painting cabinets.
After your first coat of paint is dry, it's safe to recoat typically after four to six hours. A good rule of thumb is to wait at least three hours to recoat your paint or primer if it's water-based. Waiting 24 hours is best for oil-based paint and primer.
GF Milk Paint is incredibly high-quality acrylic paint with EXCELLENT adhesion (so good that you can even paint laminate cabinets with it). It has low VOCs and is incredibly durable, so it is a great choice for painting kitchen cabinets without sanding or priming. It also really minimizes brush strokes!
Always sand down before applying any layer of paint. Sanding can remove any stray brush marks and smooth the surface so that your next layer of paint coats smoothly.