Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
To dissolve and remove stubborn stains from a toilet bowl, you can use several effective substances: Vinegar and Baking Soda: - Pour about 2 cups of vinegar into the toilet bowl. - Add 1 cup of baking soda. - Let it sit for about 30 minutes, then scrub with a toilet brush and flush. Borax:
Hot Water: Boil a pot of water and carefully pour it into the toilet from waist height. The heat can help soften the blockage. Be cautious not to splash. Plunger: Use a toilet plunger. Make sure you have a good seal around the drain and plunge vigorously. The pressure can help dislodge the clog.
Apply baking soda to the tarnish and leave for a few hours. You can also use baking soda in combination with vinegar. Try a mild urine scale remover or limescale remover to tackle brown deposits.
Citric acid
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight.
The 'fizzing' reaction of the baking soda combined with vinegar can also play a part. That fizzing may help to break down the clog into smaller particles, making them easier to flush!
While hard water stains are certainly difficult to remove, they are not permanent. There are several effective, non-toxic cleaners you can use to remove pesky hard water stains from your toilet bowl, including baking soda and vinegar, Bon Ami or Bar Keepers Friend, and borax.
To get rid of these stains, pour roughly three cups of distilled vinegar directly into the bowl and let the vinegar do the work. Using a toilet brush, dip it into the water and scrub around the inner edges of the bowl. Be sure to get underneath the rim of the bowl where buildup is particularly prone to occur.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
Taking laxative medications: Various constipation medications may help with passing hard stool, including: osmotic laxatives. emolient laxatives or “stool softeners” bulk-forming laxatives.
It is quite common for minerals such as calcium and lime, along with debris particles such as rust to build up in the rim feed and jet holes of the toilet bowl. Over time, these deposits restrict and block water from flowing into the toilet bowl which will cause a weak or incomplete flush.
Sponge the area with a solution of 1 teaspoon mild, white dishwashing detergent and 1 pint lukewarm water. Blot the stain with an absorbent pad. Continue the sponging and blotting until no more stain is removed. If any stain persists, sponge the area with a solution of 1 tablespoon ammonia to 1 cup warm water.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
For example, applying white vinegar or lemon juice and scrubbing with a toilet brush typically works on newer stains. You can also try mixing white vinegar and baking soda if you need a stronger scrub. For older stains, using an industrial-strength cleaner like CLR should do the trick.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
A lye-based drain cleaner, that's usually the most common kind. Many times straight chlorine bleach will work, but do not mix with anything else—-AT ALL!