Face Frame – The structural portion of the cabinet to which doors are attached, consisting of both rails and stiles. End Panel – The side of the cabinet that is grooved into the face frame and extends back to the wall. Bottom – The floor of the cabinet. On a wall and tall cabinet, the same component is used as the top.
The cabinet box consists of the sides, back, bottom/floor, and top/stretcher. The vertical panels form the left and right sides of the cabinet. The back or rear panel provides stability and support to the cabinet structure. The bottom/floor is comprised of a horizontal panel at the base of the cabinet.
The Cabinet includes the Vice President and the heads of 15 executive departments — the Secretaries of Agriculture, Commerce, Defense, Education, Energy, Health and Human Services, Homeland Security, Housing and Urban Development, Interior, Labor, State, Transportation, Treasury, and Veterans Affairs, as well as the ...
The frame is the front part of the box where the doors attatch. The frame is sometimes visible depending on which overlay style is chosen. For a recessed cabinet, the panel refers to the section that is set deeper. The stiles refer to the panels on the sides, and the rails refer to the panels on the top and bottom.
The highest-ranking cabinet member (after the vice president) is the Secretary of State, who is fourth in line of succession to the president, following the vice president, the speaker of the House of Representatives and the president pro tempore of the Senate.
Door Wing: Part of the hinge that connects to the cabinet door. Also called the moving plate or active leaf. Knuckle: Part of the hinge that connects the frame winge and door wing. It is also responsible for allowing easy rotation.
The frames consist of vertical stiles and horizontal rails. Individual compartments within the cabinet are divided by mid-stiles and mid-rails.
Kitchen soffits are usually installed above your cabinets, closing the gaps between the cabinets and ceiling. While kitchen soffits were very popular in older homes, the style has fallen out of favor for many homeowners and interior designers.
Jackson's Kitchen Cabinet included his longtime political allies Martin Van Buren, Francis Preston Blair, Amos Kendall, William B. Lewis, Andrew Jackson Donelson, John Overton, Isaac Hill, and Roger B. Taney. As newspapermen, Blair and Kendall were given particular notice by rival papers.
There are 5 separate pieces that make up a wood cabinet door: 2 - Stile's, 2 - Rails and a center Panel. These pieces are then connected to create one door. Wood doors can be completed in a variety of styles and finishes.
The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.
Cabinet box:You can also refer to this as the "cabinet carcass." This is the full shape of the cabinet, including the back, sides, top and bottom. It makes a box shape with space inside to store items. The front of the cabinet box is left open to allow access inside.
Kitchen Plinths. Kitchen plinths cover the space underneath lower cupboards, so there are no gaps or openings on show, giving a continuous and streamlined appearance. As well as providing a sleek, sophisticated finish, they can be used to introduce a subtle hint of colour that will complement individual taste and style ...
Crown Moulding. Goes on top of the cabinet. May or may not connect cabinet with the ceiling. Base Moulding. Goes on the bottom of the cabinets and typically connects with floor.
Put larger items behind smaller items so that the larger items do not obstruct the view of smaller ones. Try experimenting with different arrangements in your glass cabinet. To make your display cabinet look less cluttered, leave spaces in between the objects.
Center Panel:The raised or flat panel in the middle of a cabinet door enclosed by stiles and rails. Rail:A horizontal framing member of a cabinet face frame or cabinet door. Stile:The vertical-framing members of a cabinet face frame or cabinet door.
These hinges have plates or wings you can screw onto the cabinet door and frame. The hinge pin, which holds the plates together, allows the door to pivot open and close.
These cabinets incorporate a solid wood frame that is attached to the front edges of the cabinet cases. Hinges mount to this face frame and there is usually a wide gap between cabinet doors and drawer fronts which makes the face frame a visible part of the cabinet bank.
Face frame cabinets have a face frame that is attached to and covers the front of the cabinet box. This creates something of a picture frame for the front of the cabinet. The frame is made up of two vertical pieces called stiles combined with two horizontal pieces called rails.
Cabinet fittings help change the height of cupboards, with two main types available – both of which perform the same function with different results. The first are decorative and allow for a free-standing look to be created.
Also known as a mortise hinge, a butt hinge is a type of hinge with a pair of identical leafs. They typically feature a larger knuckle than other types of hinges. With their wide knuckle, the two leafs will sit flush with each other when the butt hinge is closed.