BTU's are equal to Watts x 3.413. In our case 1500 watts x 3.413 = 5119 BTU's. Most manufacturers of 1500 watt heaters generally say they provide 5120 BTUH's or British Thermal Units per Hour. Now, the colder your average climate, the greater your
Each watt the electric heater will consume will produce about 3.4 Btu's of heat. So if you have a 1,500 watt heater at 120 volts, it will put out about 5,000 Btu's.
Infrared heater energy consumption is much less than other forms of heating systems due to their direct method of transferring heat, as outlined earlier. As a result, you can expect your energy bills to be significantly lower over traditional electric or gas heaters.
You get about 3.4 BTU/hr for each watt/hr. So if you connect this through a power meter and it says 1500 watts, you are getting 1500 x 3.4 = 5100 BTU/hr of heat.
A MagikFlame has 1500 watts which convert to 5118 BTU per hour. This BTU per hour conversion allows you to move from discussing energy to discussing heat. If you want to do it yourself, multiply your watts by 3.41 to get your BTU/h, or divide your BTU/h by 3.41 to get watts.
In other words, a 1,500-watt heater will be great for a 250-square-foot room with central heat. If that same room had no other source of heat, you'd need a 2,000-watt heater.
The upfront cost of installing infrared heating can also be a deterrent for some homeowners. While infrared heating panels are competitively priced when compared to installing boilers or central heating systems, people may still see them as more expensive than traditional convection heaters or electric radiators.
But don't worry, infrared heaters are incredibly efficient. They're designed to keep a space warm while using as little electricity as possible. This makes them much cheaper to run than central heating, space heating, and air source heat pumps.
The good news is that modern infrared heaters are very safe to use even when left unattended during the night, even while you are sleeping.
Lifespan of infrared panels vs traditional heating
When considering heating options, longevity is a crucial factor. Infrared panels are known for their durability and should last around 20 years, but depending on the quality of the panel, this could be anywhere from 10 to 30 years.
Conclusion. So, after looking at the different types of electric heaters available, due to its lower power-output, halogen heaters are the cheapest electric heaters to run. Shop our range of Halogen Heaters here .
Typically, you need 70 watts per square meter of space. If you wish to identify the minimum wattage required for efficient heating, multiply the square meterage of your room by 70. For instance, a 10-square-meter room would generally require a 700W panel heater for moderate insulation and ceiling height.
On average, you can expect to pay about 20 cents per hour to run a typical space heater that's 1,500 watts and can heat a standard room such as a home office or bedroom. If you run it for eight hours per day, you'll pay about $1.60 per day or $48 per month.
Government regulations limit space heater output to 1,500 watts, which is not nearly enough to heat an entire home. In general, one square foot of space requires about 10 watts of electricity to heat, which means that a space heater operating at its maximum output can heat a room no larger than 150 square feet.
100% efficient at point of use
Infrared heaters get their power directly from the mains, so there are no system losses like you'd find in a fuel-based system. As they convert every watt of energy into radiant warmth, you're never paying for waste.
That being said—radiant heaters like infrared floor, wall, and ceiling heating systems directly convert electrical energy into heat without affecting air moisture levels. They transfer warmth to boundaries such as floors, walls or ceilings. By doing so, they warm up surfaces in the room instead of the air.
It reduces the like-for-like wattage, which means low electricity usage in the long run. With infrared heaters, you can only heat the room you are using. Unlike central gas heating, for example, you need to heat the entire house, even if you use a single room. Infrared heaters can be programmed as per your need.
Infrared heaters are generally more environmentally friendly as they do not use combustion for heat generation, reducing carbon emissions. Radiant heaters, depending on their fuel source, may have a greater environmental impact—for example, if you use a combustion boiler to heat the water used in the system.
When determining the BTU's provided by any electrical heating source, simply multiply the watts by 3.413 and the resulting number is the BTU's. In our case 1500 watts x 3.413 = 5119 BTU's. Most manufacturers of 1500 watt heaters generally say they provide 5120 BTUH's or British Thermal Units per Hour.
For example, if you are heating a 12-foot x 12-foot bedroom, the space includes 144 square feet. Multiplying this by 10 watts shows that the necessary heater wattage for the room is 1440.
As a rule, electronics, and appliances that are rated for 1,000 watts or higher likely need a dedicated circuit, especially if the item will be operating for long stretches of time.