Measure Height and Width: For each cabinet section, measure the height from top to bottom and the width from one side to the other. Record these measurements in inches for precision. Calculate Each Section's Area: Multiply the height by the width for each cabinet section to get the area in square inches.
Surface area of cupboard= 2 [ (length × breadth) + (breadth × height) + (length × height) ].
Cabinet Measurements
Record. Now multiply the height by the length. Now, measure and multiply the lower cabinets as you did the upper. Add these two total measurements, in inches, together and divide by 144 to get the square feet.
In the kitchen, the standard measure for storage space is shelf/drawer frontage, which is calculated by multiplying the cabinet width * cabinet depth * number of shelves and drawers.
Measure the length: Start by measuring the back of one side of the cabinet (from back corner to middle edge), then do the same on the other side These measurements are typically the same, but they don't have to be. Measure the width: Then, measure the depth from the back corner to the front corner.
Chapter Three: Calculate Total Countertop Square Footage
To calculate total square footage, use this formula: (Length×Width)/144=Square Feet (s.f.)
Determine the width from right to left after that. It is 7' usually with 8' height. Multiply the two to get the wardrobe's square feet (sqft). As a result, the wardrobe in this case is 8'X7' = 56 square feet.
Standard kitchen cupboards typically range in width from 300mm up to a maximum of 1200mm in the following increments: 300mm. 350mm. 400mm.
To measure a room with closets, simply measure each closet separately by multiplying length by width. For example, if your closet measures 3 feet by 8 feet, your closet is 24 square feet in total.
The formula is: Rail height divided by 2 minus 1/16″. Make sure you use the same measurements for a run of cabinets in the same configuration so your doors and drawer fronts line up. Double check your calculations. Your fronts should align horizontally and vertically (i.e. Drawer 1 and 4 should be the same height.
It's calculated by multiplying the height by the width of each cabinet section, accounting for both the front view and any additional side areas that contribute to the total surface area.
Eg a household of three or more people ideally should have 2.7 m of floor cupboard storage and approx 3.3m of wall cupboards, or you can use the measurements of a 10x10m kitchen, this area will fit approx 12 cupboards of a particular size, this at least will be a good starting point.
multiply length times width in inches and divide it by 144. Please remember to include the backsplash in your calculation to get an accurate estimate. Most cabinets island are 36″ to 48″ deep and about 60″ to 80″ long.
The formula varies depending on the shape. For rectangles and squares, A = length x width. The area of a circle is A = 𝜋r2. Finally, the area of a triangle is A = ½ (base x height).
You can calculate the volume of a box by multiplying length x width x height. Using the example of the single wall box this will be 102 x 102 x 102 which equals 1,061,208 cubic millimeters (㎣). In metric units volume is usually expressed in millimetres and litres.
You'll want to measure the height (top to bottom) and width (side to side) of all cabinet doors. It helps to note how many cabinet doors you have of the same same size, although we recommend double checking dimensions just in case some doors look like the same size, but are slightly different.
Medium-sized bedroom cupboards generally range from 90 cm to 150 cm in width. These cupboards offer a balance between storage capacity and space efficiency, making them suitable for most average-sized bedrooms.
For base cabinets, measure from the wall to the front edge of the cabinets. For wall cabinets, measure from the back wall to the front edge. Knowing the depth will help you choose cabinets that fit your space without protruding too far.
Base cabinets: Base cabinets are typically 34.5 inches high, 24 inches deep, and 12 to 48 inches wide. Wall cabinets: Wall cabinets are typically 12 to 42 inches high, 15 to 24 inches deep, and 12 to 36 inches wide.
Measure the length and width, in feet, of each room. Then, multiply the length by the width to calculate that room's square footage. For example: If a bedroom is 12 feet by 20 feet, it is 240 square feet (12 x 20 = 240). For each room, write the total square footage in the corresponding space on your sketch.
Wall Cabinets
They tend to be a standard 30 cm deep with a variable height. Most of them are likely to be either 76 cm or 90 cm tall. Some manufacturers make deeper units at 35cm deep.
The basic volume calculation is length × width × height. It doesn't matter which side you call what - the important thing is that all three are multiplied together. As an example: A box that is 20cm width, 15cm long and 10 cm height has a volume of: 20 × 15 × 10 = 3000 cm cubed.
The average measurement for a kitchen countertop is 30 square feet. However, the variation between kitchen designs is vast. There are kitchens with much smaller or significantly larger countertop measurements. The right size for your kitchen will depend on the floorplan and counterspace you want in your kitchen design.
While it is true that you convert inches to feet by dividing by 12, that doesn’t work for converting square inches to square feet. Because a square foot is 12 inches on each side, there are 12 2 = 144 square inches per square foot (see the picture).