Remove excess water by blotting with a dry cloth; rehang the shade when completely dry. Too frequent cleaning may remove the fullness and body of the pleated fabric. Dry cleaning and ultrasonic cleaning are not recommended.
Dusting: Regular, light dusting maintains a like-new appearance for most shades. Vacuuming: Vacuum gently with brush attachment. Compressed air/hair dryer: Forced air can be used to gently dust the shade. Spot-cleaning: Spot-clean shades with a soft cloth or sponge using warm water and mild detergent if needed.
You can remove the blinds from the mounting brackets for extensive washing. To clean dust off of shades, use the soft-brush attachment on a vacuum cleaner. To remove stains, use dishwashing liquid and water.
The easiest way to keep your Pleated blinds clean and dust free is to incorporate them into your vacuuming cleaning routine on a regular basis. Use the soft brush attachment on your vacuum cleaner, on the lowest setting. This is a small, flathead brush with a row of short bristles.
If the pleated filter element is seriously polluted and the physical method of cleaning can't restore its flux, it must be cleaned with a chemical cleaning agent. The purpose of cleaning the filter element is achieved by chemical reaction with impurities on the surface of the filter element.
Pleated Paper or Synthetic Cartridges: These inexpensive filters are often not washable but you can clean them several times before replacing them. HEPA Filters: While some of these filters cannot be thoroughly cleaned, the lifespan can be improved by removing dust before routine replacement.
Cellular shades provide more energy efficiency than pleated shades because of their honeycomb construction, which you can see when you look at them from the side. Pleated shades look the same as cellular shades from the front, but do not offer the insulating honeycomb design.
The water solution generally works well with most cellular shades, but shades with a room-darkening layer need the dry-cleaning solution, Burns said.
Like all blinds, pleated blinds attract dust and dirt and need a good swift clean every now and then. Unfortunately, most people don't clean their pleated blinds as regularly as they should to keep them looking their best all year round.
Use Air to Remove the Dead Bugs
The great news is you can do it quickly and effortlessly. Get a can of compressed air and a plastic straw. Place the straw into the shade and press for the air to come out. If you don't have a can of compressed air, you can use a hairdryer instead.
Minimal care and cleaning is needed to maintain the beauty of your treatment. Clean with a low suction, hand held vacuum or dust with a soft, clean cloth or feather duster. Never immerse your treatment in liquid of any type.
A 1" pleated air filter must be replaced every 30-60 days. A 2" pleated air filter should be swapped out every 3 months. A 3” pleated air filter should be changed out every 120 days. A 4" pleated air filter should be exchanged every 6 months.
Pleating the filter media allows more media contained within the filter frame. More media means more surface area to capture and hold particles. The capacity to hold more dust makes the pleated filters last longer than fiberglass filters.
Pleated air filters offer a much higher level of filtration and are much more efficient than non-pleated filters at capturing microscopic airborne particles. Both types of filters can filter out lint, dust, and insects but pleated filters can also filter pollen, mold, dust mites, bacteria, and pet dander.
The easiest way to maintain your blinds is to prevent them from getting too dirty in the first place. Clean your blinds regularly—every week or two is best—and the dust won't have a chance to build up, says Sara San Angelo, a professional housecleaner and founder of Confessions of a Cleaning Lady.
The fabric from which the pleated blinds are made of is 100% polyester.
The pleated blind will stick best on smooth surfaces. The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area. Clean with a duster or vacuum lightly using the soft brush attachment.
For cleaning a canvas awning, water-based stains should be treated first by rinsing with cold water. If this is not sufficient, canvas fabrics may be gently washed with fragrance-free soap and warm water, then rinsed thoroughly with clean water. It is critical that you do not use high pressure hoses when rinsing.