If your water pressure seems low, the first step should be to test how much pressure you're actually getting from the shower head. A typical home's water pressure should be somewhere between 45 to 55 psi (pounds per square inch).
Normal psi for a home pipe system is between 30 and 80 psi. While you don't want the psi to be too low, it violates code to be above 80. Instead, you should aim for a psi that's between 60 and 70.
Differentiating Between Low Flow And High Flow Shower Heads
If you're looking for the most pressure, go for the 2.5 GPM Flow Rate, unless you are restricted because you reside in California, Colorado or New York. Again, this has been the Maximum Flow Rate since 1992. The step down from there in Flow Rate is 2.0 GPM.
If your home water outlets (i.e. taps and showers) can deliver over 15 litres of water per minute, this is considered good water pressure. Between 10 and 15 litres of water per minute is acceptable.
Absolutely. Many low-flow shower heads still deliver a powerful, satisfying shower even with a reduced flow rate. If you're looking for a better showering experience that also helps you save water, we recommend checking out the 1.8-GPM shower head model from hai.
A standard 2.5 GPM shower head uses 2.5 gallons of water each minute. That's 25 gallons for a 10-minute shower. VS. A low-flow 1.8 GPM shower head uses 1.8 gallons of water each minute.
A 2.5 gpm shower head will have a better pressure and shower experience than a 1.5 gpm shower head. A 1.8 gpm shower head would have a better pressure and shower experience than a 1.0 gpm shower head. Another drawback of low flow shower heads boosting the pressure is the temperature instability.
Studies have shown that 1.8 gpm is the minimum flow rate to have a good enjoyable rinsing, so the common 1.75 gpm models, is somewhat good enough for a decent shower. To save water further and still have a full enjoyable rinsing experience.
That's a common misconception. A lower flow rate does not mean that your shower will have less pressure. Water flow (gpm) refers to how much water is coming out, not how fast or how hard it's coming out.
If your showerhead is labeled 2.5 GPM or less, you have a low-flow showerhead. Any showerhead labeled 2.6 GPM or above is a high-flow showerhead. If your showerhead doesn't have a label, try this trick to determine the flow rate. Place a bucket or container with a 1-gallon marker under the showerhead.
Did you know that standard showerheads use 2.5 gallons of water per minute (gpm)? Water-saving showerheads that earn the WaterSense label must demonstrate that they use no more than 2.0 gpm.
Water Pressure Readings
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI. Once you measure the water pressure in your house, you can adjust it to a setting that is ideal for all family members and household uses.
Banging or Clanging Noises in Pipes
This is a sign that the pressure in your pipes is already extremely high, and the shuddering is your pipes adapting to the pressure increasing when you turn off the water. This also means that you could find yourself dealing with plumbing leaks within a short period of time.
Yes. High-pressure shower heads increase water pressure either by decreasing the flow rate or using a compression chamber.
While it is possible to remove flow restrictors from shower heads, we strongly advise against it for several reasons. Flow restrictors for faucets are an integral part of most aerators and it is generally not possible or desirable to remove them.
Switching to a 2.0 GPM shower head saves more than 1,825 gallons of water and $25 per year in water and energy costs. Those numbers jump to 7,300 gallons and $100 in savings for a family of four. Know the Features. A lower flow rate doesn't have to mean wimpy showers.
Leaky, corroded and clogged pipes can lead to low water pressure in the shower. The showerhead might be so old it needs to be replaced. The shower controls could also be responsible for flow issues.
One of the simplest reasons for the lose of shower pressure is a blocked shower head. Shower heads accumulate mineral residue when the shower head is in use. Once the water has been shut off, over time these mineral deposits will bond together and create a limescale build up inside your pipes or shower head.
Mineral Accumulation Within Pipes
In older homes or those with outdated plumbing systems that heavily feature galvanized pipes, mineral accumulation is a common cause of low shower pressure. These mineral deposits build up with time.
Efficient shower heads use at least 1.5gpm. Taking the same amount of time in the shower uses only 15 gallons of water. The water savings amount up to 65 gallons of water!