Algaecide is the best way to prevent algae from growing in your unused pool. Generally, the colder the winter, the longer-lasting algaecide you'll want. Some winter algaecides last up to three months. You should pour in the algaecide on the last day you use the pool for the season and let the pump run for 24 hours.
Algae growth is stopped at temperatures below 40° F, but some algae can continue to survive, and like weeds in a lawn, can go dormant over the winter, coming back to life in early spring, weeks before you open the pool.
One final note on algaecide: Contact algaecide is different from liquid algaecide. Many liquid algaecides don't work in cold water, and we don't recommend using them even in the warm months.
Algae grows slower in cold weather...but it still works.
Green discoloration in a swimming pool is caused by the growth of algae, a type of green aquatic plant that floats on the surface of water. Algae usually flourishes in warm water but can still take over your pool in winter if given half a chance.
Grab a brush and some baking soda. Bicarbonate, the active ingredient in baking soda, is an effective spot treatment to help kill the algae and loosen it from the wall. Make sure you really get every last particle free; black algae has particularly long and stubborn roots which makes it a persistent strand.
Shocking the pool during the winter months can certainly help to avoid a green swamp-like pool in the spring. It's often recommended. However, poor water balance or improper application can lead to unintended consequences, such as discoloration and damage to pool surfaces.
Copper pool algaecide lasts longer to work throughout the entire winter. Winter algaecide is designed specifically for cold weather algae prevention. Adding algaecide to your water does not interfere with other chemicals.
Here are our recommendations for water balance during the winter months: Chlorine- Use enough tablets and a low setting on the chlorinator to keep a reading of 2 to 4 ppm. This will provide a consistent amount of chlorine.
A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.
Pool algae occurs for many reasons. Low or inconsistent chlorine levels, faulty pool filtration and poor water circulation may be to blame. Preventing pool algae from flourishing helps to keep your pool operational so you can enjoy it all season long. The key to an algae-free pool is regular maintenance.
Algae can be very slippery, causing swimmers to fall resulting in bumps, bruises, cuts and even broken bones. Don't try to swim in a pool that's full of algae. Besides causing injuries, an algae infested pool creates a higher risk of drowning for those who are not expert swimmers or those who fall unconscious.
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
Never use chlorine tablets during the winter: you'll want to opt for Assault 73 Shock or Quick Shock granular chlorine once a month (1 pound per 10,000 gallons.) After shocking, run the filter for 12 hours, then shut off.
You really only need one chemical (algaecide) to properly winterize a swimming pool. You need some other stuff to protect your pool from harsh winter conditions, but only one chemical to add when closing.
Best swimming pool algaecide for all pools
For an all-purpose swimming pool algaecide, we recommend Kem-Tek 60% Algaecide Concentrate. This pool and spa algaecide contains 60% of its active ingredient, polyquaternium WSCP. It's effective at removing most types of algae and preventing them from returning.
The use of baking soda in pools can spot treat algae
No one ever wants to see algae build up in their swimming pool. It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool.
A late September or October closing is a great way to set up for success in the spring. If you are already suffering from an algae bloom; take care of that before you close. Opening your pool early in the spring is a good idea if you want clear water.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Regular Pool Maintenance: The best way to prevent a green pool is regular maintenance. This includes vacuuming the bottom of the pool, scrubbing the walls, skimming the surface to remove debris and pollen, frequently cleaning the filter system, habitually checking the pH level, and adding chlorine on a regular basis.