“Caustic chemicals are not okay, not on stainless steel,” she said. “Not even bleach.” Elkay even warns against storing open containers of household cleaners and chemicals containing chloride such as bleach, acid, drain cleaner and toilet bowl cleaner beneath the sink.
Cleaners such as Bon-Ami, Bar Keepers Friend or other typical household cleaners are recommended. These cleaners can easily be used with warm water, sponges or clean cloths. Remember to always scrub in the direction of the polish lines so that your efforts blend with the surface of your sink.
Toilet Bowl Cleaner Used on Other Fixtures
Like drain cleaners, toilet bowl cleaner contains highly corrosive chemicals. The strong chemicals could damage or destroy the finish on your bathtub or other fixtures such as a sink, and can also damage grout.
Harsh abrasives, scouring powders or steel wool, as well as cleaning products containing chlorine, bleach and ammonia all have the potential to damage the finish. Even plain water can leave unsightly marks and spots if not utilized properly.
Common causes of stainless steel corrosion include chlorides, hydrochloric acids, sulfuric acids, iron or carbon steel contact, and high temperatures. There are over 150 grades of stainless steel, and some are more prone to corrosion than others.
You can use toilet bowl cleaner in the kitchen
It might sound a tad outside of the box, but you can also use toilet bowl cleaner in the kitchen. Specifically, you can use toilet bowl cleaner on tile grout.
You can use any EPA-certified disinfectant on your Sinkology fireclay, vitreous china, nickel, or stainless steel sink. It's possible that you have some of these products already in your home, like Clorox or Lysol wipes, so you can get to disinfecting right away.
Many people believe that toilet bowl cleaners can be a great substitute for cleaning other areas of your bathroom. While it's effective for your porcelain toilet bowls, it isn't recommended for large surfaces like your shower area.
Avoid cleaners that can damage steel and finishes. Instead, clean your stainless steel appliances with a dish soap like Dawn® Platinum. Its unique formula is tough enough to break up grease and grime while staying gentle on stainless steel surfaces.
The Magic Eraser is great for many surfaces, but it is not recommended for stainless steel appliances.
If the white spots are on a stainless steel sink, treat it in a similar way: Spray lemon juice or vinegar on the sink. Let it sit for up to 5 minutes, then sprinkle baking soda all over it. Wipe with a cloth.
Disinfecting wipes can be safely used on many different surfaces in various settings and environments. It's essential to always take a few moments to read the label first and, as mentioned earlier, check the guidelines of certain items you are disinfecting. Safe surfaces for disinfecting wipes include: Stainless steel.
Selecting a Disinfectant
While bleach should generally be avoided for cleaning stainless steel products, common products such as Lysol Spray or Lysol Wipes can be used on stainless steel. If you decide to use a product of this type, it is extremely important that you rinse the surface thoroughly with fresh water.
Lysol Kitchen Pro
It works on most sink materials including stainless steel, enameled cast iron, composite and porcelain. Kitchen Pro Antibacterial Cleaner: This cleaner is safe to use on food contact surfaces and kills 99.9% of kitchen viruses and bacteria.
You may start to notice improvement in as little as 15 minutes, though that is the minimum time your dish soap should sit in the toilet. Again, we prefer to let it sit overnight whenever possible. Once enough time has passed, go ahead and flush your toilet.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
The passive layer on stainless steel can be attacked by certain chemical species. Chloride ion is the most common of these and is found in everyday materials such as salt and bleach. Harsh pitting corrosion is a localized damage that eats pits into stainless steel.
Use a thin paste of sodium carbonate (washing soda) in hot water, and rub with a fine nylon scouring pad. Rinse and follow by Routine Cleaning. Nitric acid is a "friendly" acid towards Stainless Steel and is the only mineral acid which should be used to clean stainless steel.