A dirty furnace filter is the top reason for a constantly running furnace. The filter collects dust and debris that restricts airflow and causes overheating. When the system overheats, the fan stays on to play catch up on cooling it down.
Furnaces typically run for about 10 to 15 minutes in moderate weather. Extreme cold can result in longer cycle times.
If the time between cycles is less than five minutes, the furnace is most likely short-cycling. Heating cycles that run for shorter periods of time produce more frequent heating cycles. Depending on the outside temperature and how well-insulated your home is, these short cycles may occur five to eight times per hour.
Yes that's normal. My furnace runs 48 times per day, every day all winter. Long run times is what you want for high efficiency.
If your thermostat is malfunctioning, it can cause your furnace to turn on and off more frequently than it should. Make sure your thermostat is set to the correct temperature and is working properly.
While it should cycle throughout the day, clicking on too frequently may indicate a problem. Homeowners often find themselves wondering, "How often should my furnace cycle?" The answer lies in a gray area. On average, furnaces should kick on and turn off anywhere from three to eight times per hour.
If your furnace kicks on and off, the first thing you need to check is your filter. If it is dirty and covered in contaminant matter, change it and see if a fresh filter solves the short cycling issue.
When a furnace runs constantly, it probably means that something is dirty or clogged. The filter is the first thing you want to check, especially if you do not replace your filter as often as recommended (once a month during the heating season).
"Your system's [furnaces] aren't designed to run in temperatures that are below-zero for long periods of times," Marchand said. To help alleviate some of the stress off of systems during these cold temperatures, set your thermostat a few degrees lower than what you're used to.
Incorrect settings on your thermostat or fan limit switch can cause the fan to run continuously. Faulty wiring or a broken fan limit switch can also cause your fan to keep running. You can diagnose and fix some furnace fan issues on your own. Faulty wiring or a broken switch will require professional repair.
A furnace cycling on and off repeatedly can be caused by various reasons, from dirty filters and obstructions in ducts and registers to incorrect thermostat settings and faulty limit switches. By following the steps above, you can help prevent your furnace from cycling too frequently and save energy costs.
If someone is at home in the daytime, 72° F (22° C) is a good start, but aim for 68° F (20° C). If everyone is away from home in the daytime or you're asleep at night, we feel 66° F (19° C) to 62° F (17° C) is best.
If your furnace turns on, and off, and back on again in a seemingly endless loop, you're experiencing short cycling. Essentially, short cycling occurs when the system cannot complete a full heating cycle. There's no one cause of short cycling, but with some troubleshooting you can get to the bottom of the issue.
Blocked vents or a clogged air filter may cause your furnace to run and then shut off too early. It's easy to fix these issues on your own. You should change your furnace filter at least once every three months. Follow our guide to do it yourself.
In the heating, ventilation, and air conditioning (HVAC) business, short cycling is a phrase used to describe when a heater or air conditioner cycles on and off too frequently. It signifies a problem in your heating system's proper functioning and efficiency, in which it is not completing its heating processes.
A furnace limit switch is a component of a forced-air furnace that is responsible for turning on the furnace blower once the desired heat has been met inside the furnace. Without a functioning furnace limit switch, a furnace would not be able to regulate the temperature in conjunction with a thermostat.
Your blower is probably the cause of a constantly running furnace if the system is turned on but doesn't produce any warm air. Corroded wires or a blown fuse can cause this issue. Since this problem involves electrical components, contact a technician to fix the problem safely.
The World Health Organization (WHO) recommends setting your thermostat no lower than 64 degrees (F) in the Winter months while people are in the home. If there are infants or elderly individuals, they recommend keeping the temperature at 70 degrees at a minimum.
Typically, a furnace should cycle three to eight times per hour. While furnace cycling is normal, frequent cycling can indicate that your heating is struggling to keep up. We've put together this guide to help you understand the difference between normal furnace cycling and short cycling.
Running your furnace constantly can put extra strain on the system, potentially shortening its lifespan. It is important to have your furnace regularly maintained to ensure it is in good working condition and not being damaged by constant use.
First, check the thermostat to ensure it is set correctly and functioning properly. Replace batteries if it's battery-operated, and make sure it's set to 'heat' and not 'fan' mode. Next, inspect the air filter; a dirty filter can cause airflow issues that make the furnace run continuously.
Furnace short-cycling refers to a furnace that's switching itself on and off too frequently. It's normal for a furnace to turn on and off periodically. They are designed to cycle on and off, but a standard home furnace should only turn on and off between three to eight times per hour.
A malfunctioning thermostat – If the thermostat is not operating properly, it can cause the furnace to cycle too frequently. Some thermostats require batteries, which should be changed every six months.