EASY Algae Remover is a professional strength product but suitable for DIY use. The easy to use formula can be used on paths, patios, decking, walls, fences, roofs, garden furniture, statues and memorials.
Bleach solution
All you need to eliminate the algae is bleach and water. While you can try using water alone, you will need to wash the siding more frequently to eliminate the algae and stave off new growth.
I've had fantastic success cleaning algae from just about every outdoor surface using liquid dish soap and my favorite exterior cleaning brush. This brush is one that's made to clean RVs. It's got lots of bristles that are about 2.5 inches long and they're soft.
Mix two gallons of water, two cups of oxygen bleach, and one cup of borax. Stir the recipe until everything dissolves. Add ¼ cup of dish soap and stir. Apply the cleaning solution and scrub with a brush.
Hardware stores and home centers sell products designed to kill moss and algae, but you can save money by using inexpensive chlorine bleach or a non-creamy hand dishwashing detergent, such as Dawn.
TIP 5: USE BLEACH OR VINEGAR
Oxidized bleach immediately starts to kill algae cells once it comes into contact with it. Bleach, however, should not be your first option, especially if the area you plan to rid of algae is near plants or grass.
Bleach is great for killing algae (and other organisms that may lurk in your tanks) and for keeping it from coming back.
Barley straw is a natural way to fight algae. On contact with water, the straw starts to break down, and as it does so it releases peroxides into the water which combat algae. Available in mini bales, or as a concentrated extract of barley straw liquid, it's a natural way of chemically fighting algae.
Shock Your Pool
Shocking is the process of adding chemicals to your pool to raise chlorine levels and kill bacteria and algae. We recommend using a calcium hypochlorite shock to treat your algae problems.
Since baking soda is highly alkaline and reacts when mixed with an acid, many people assume it can be used to change the pH of a pond to discourage algae growth. However, even a large amount of baking soda dissolved in a pond will have little to no effect on either algae or pH.
In the case of blue-green algae: Use 1.5 to a maximum of 2.5 ml of the 3% solution of hydrogen peroxide per gallon of water. In the case of green algae: 20.25 ml to a maximum of 32.5 ml of the 3% solution of hydrogen peroxide per 13 gallons of water.
Apply a mustard algaecide following the label directions. Allow the water to circulate for 24 hours. Use a pool vacuum or backwash the pool again to remove the remaining dead algae. In persistent cases, brush the pool and apply algaecide once more after two to four days.
If you have an algae problem, your best friend is white vinegar. White vinegar can quickly kill algae but is not harmful to birds, insects and the majority of plants. Use a mixture of one part water to one part white vinegar to spray down the area and kill the algae.
Sodium Percarbonate is an excellent killer of bacteria, fungi, various viruses and mold, so it can be used as a very effective agent for removing algae and moss.
Snails, crabs, and sea urchins also eat algae, but they are known to eat red slime algae, green film algae, hair algae, brown film algae, and many other species of algae in the saltwater.
StoneCare4U Essential Algae Remover is a safe and easy way to remove algae from any 'hard' external surface. Its biodegradable formula can be used on a multitude of outdoor surfaces including paving, walls and roof tiles.
Q-Clear® is a powerful and fast acting biocidal product used for quickly killing and removing algae, mildew, lichens, moulds and fungi from all external hard surfaces.
Another chemical-free solution that you can consider is a mixture of baking soda, water and vinegar. Add two parts of white vinegar to one part of water and three heaped spoons of baking soda. Dip a scrubbing brush into the mixture and apply it to the algae stains on your furniture. Leave it for about ten minutes.
Vinegar is acceptable to use for killing algae and cleaning a pond when it is drained. The acidic is good at lifting away the stubborn algae deposits and stains without damaging the liner material. When used in this way in limited amounts, the leftover vinegar residue won't hurt the fish or change the pH of the water.
Considering the above analysis of some of the key ingredients of Dawn dish soap, we would have to conclude that no, Dawn is not an environmentally friendly product. It contains one or more ingredients that are potential groundwater contaminants. They can pollute the water system and can harm fish or marine life.
Clean the area or surface regularly and use a specialist green stain remover, such as our Green Growth Remover, which helps prevents regrowth and delays it coming back. Good drainage and air circulation. Don't place your favourite pine wood planter in a dark, shady corner. Move your patio furniture around regularly.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own.