Best swimming pool algaecide for all pools
For an all-purpose swimming pool algaecide, we recommend Kem-Tek 60% Algaecide Concentrate. This pool and spa algaecide contains 60% of its active ingredient, polyquaternium WSCP. It's effective at removing most types of algae and preventing them from returning.
It may surprise you to learn that algaecide isn't a magic bullet for getting rid of algae in your pool. In fact, algaecide is more effective as a preventive measure than a treatment. Don't get us wrong—it still helps as an algae treatment, just not in the way you might think.
Copper Based Algaecide
Copper-based algaecide is effective in killing different types of algae in your swimming pool because it lasts longer in pool water. The common types of algae that this chemical can kill include green pool algae, mustard algae, pink pool algae, and black pool algae.
Green PondFx is the safest, most effective algaecide on the market for backyard ponds, but caution must be used when applying it during warm summer weather!
Are algaecides safe for my pond plants and fish? Algaecide treatments, no matter what chemical is used, can be safe for both fish and plants if used correctly. The chemicals in algacides, although potent, do not directly harm your fish.
The easiest way to clean algae from the top of a pond is simply lifting it up and off. Use a skimmer or algae net to skim the surface of your pond, pulling the algae free and removing it from the pond. This may take a while, but will give you immediate results when it's done.
In the pool chemicals (or spa) world, algaecide comes in three different varieties – quaternary, polyquats and copper-based. These chemicals act by disrupting energy transport, cell division, or the cell membranes which allow the algae to become more vulnerable to sanitizers such as chlorine.
Add a dose of algaecide, bring your chlorine level high by shocking, and run the filter continuously until the problem clears. The next day you should vacuum up the dead algae and backwash your filter. Algae thrives in hot weather and in pools with low or no chlorine.
Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Too much algaecide can cause foaming that can damage your filter. In some cases, too much algaecide can also cause eye and skin irritation. In addition to adding algaecide after shocking your pool, you should add algaecide to your pool water when closing down for the year.
There are a few different types of algaecides that contain various chemicals to suppress and fight off algae. Many of them include copper or copper sulfate. It's this copper that oxidizes in the water. And when copper oxidizes it turns a green color causing your pool to look green.
The HTH Ultimate Algae Guard is the one that is added every 90 days, it is a copper based algaecide.
It took two days but it was completely gone. Not a trace. I would so recommend this product.
Yellow algae, also known as mustard algae, is a shocking sight when it is found in the corners of residential swimming pools. The good news is that yellow algae is uncommon.
If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it's possible that you used a poor-quality chlorine shock.
Winter Pool Algaecide is highly effective at preventing all forms of algae. Polymer pool algaecide stays strong all winter providing dependable control of algae growth throughout the winter season. Unique winterizing algaecide is specifically formulated to fight cold weather algae for up to 5 months in a covered pool.
Registered algaecides include copper sulfate, copper chelates (ethanolamines, ethylene diamines, triethanolamines, triethanolamine + ethylene diamine, and copper citrate/gluconate), endothall (as the mono (N,N-dimethylalkylamine) salt), and formulations containing the active ingredient sodium carbonate peroxyhydrate.
The algaecide isn't a requirement for saltwater pools, but there's no reason not to use it. However, the best way to control algae is to keep the pool water balanced because algae love it when pH or total alkalinity gets too high.
Quats are biocides that control algae in swimming pools to minimize undesired biological growth. Quat algaecides are also known for their distinctive odor, and foaming that can result from overuse. You can use a Quat algaecide for controlling algae during the summer or as a winter algaecide.
The best method to remove green algae is a UV light. This will zap the algae in suspension continuously and not harm your fish in any way. When you first turn it on, your pond will go from green to brown or grey.
Suspended algae blooms are typically caused by an imbalance in the water. Factors like too much sunlight and excess nutrients can lead to issues with floating algae growth. Excess nutrients in the pond are often caused by overfeeding fish, stormwater runoff, stocking too many fish, or a lack of proper pond filtration.
While plankton algae blooms occur in response to warm and sunny conditions in the summer, the algae growth is supported by high levels of nutrients in the water (most often phosphorus and nitrogen) that may come from fertilizers, manures, septic systems, urban runoff or animal waste entering the pond.