Vinegar is the go-to natural cleaner when faced greasy cabinets. Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth.
Use 50% water and 50% distilled vinegar for a streak-free look. If your kitchen glass cabinet has wooden mullions, then do not spray the distilled vinegar directly on the surface. Instead, spray onto a cloth and gently wipe.
Create a cleaning solution with 1-part baking soda, 2 parts warm water and the lemon juice. Add the solution to a spray bottle and spray the liquid onto the kitchen cabinets. Leave for 2-3 minutes, allowing the baking soda to work its magic. Use the soft sponge to gently scrub the grease away.
Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
Related Articles. The sticky residue found on your kitchen cupboards is usually caused by cooking grease and dirt, but it may also be the residues left by some cleaners. No matter what its source, a sticky residue is unappealing and damaging to your kitchen cabinets.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Mix equal parts of white vinegar and hot water in a 5-gallon plastic bucket. Add a few drops of olive oil to the mixture. The vinegar and hot water help to disinfect your cabinets, while removing grease and grime. The olive oil provides a subtle shine.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
For removing very stubborn stains caused by grease and grime, use a small amount of rubbing alcohol and a clean, dry cloth and rub the polyurethane surface thoroughly. Removing Stains. – To rid your polyurethane countertop of stains, rub the surface using a microfiber sponge.
After wetting your brush with warm water, add a little baking soda, then scrub away on the cabinets. Follow with a damp, warm cloth to remove the residue. Not only will the baking soda cut through the grease, but it's also non-abrasive, so it won't harm your wooden cabinets.
Mix a solution of 50/50 vegetable oil and vinegar in a small spray bottle. Spray on the outer surfaces of your wood cabinets, then rub in with a clean rag. Buff it into all the surfaces of the cabinet until it is shiny and beautiful.
Dawn dish soap is famous for being an excellent degreaser, and this simple tip might be the best way to clean wooden cabinets. It is also mild enough that it won't ruin your wood cabinets or their finish. You can even use dish detergent as the best way to clean painted kitchen cabinets, too.
The sticky residue is usually caused by cooking oil, fat from foods and dirt. It begins when you cook and even a spoon of oil in a hot pan will cause some of the oil to evaporate into oil vapour.
The distilled white version is the most-often vinegar used as a household cleaner, but, according to the Gerson Institute, the apple cider type works equally well. Both types are adept at killing germs, preventing the growth of bacteria and eliminating unpleasant odors in your kitchen cabinets.
To clean white laminate cabinets, create a mixture of 1 tablespoon baking soda and 1 gallon of warm water. Allow the baking soda to dissolve in the water. Then, use a soft cloth to rub the mixture on to the cabinets to scour away grime and stains.
Rub a little acetone, found in nail polish remover, over an inconspicuous spot in a small, circular motion. Lacquer will dissolve and varnishes and shellacs will turn sticky after a few minutes. Polyurethane will repel the acetone, and it will bead up like water.
If you don't like using strong chemicals on your wooden products, you can use vinegar and baking soda to remove polyurethane.
We recommend wiping with a damp cloth, either using soap and water or a natural based cleaning solution. Most standard cleaning solutions contain either an alcohol or ammonia base, which over an extended period of time, can eat through the finish. At Grain Designs we also use low sheen urethane finishes.
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
A mixture of 1 part Chlorine Bleach, (Clorox) to 32 parts water (½ cup bleach per gallon of water, or 4 teaspoons bleach per quart of water) will need to sit on surfaces for 5-10 minutes in order to disinfect them. We found this did not harm either of our wood finishes.
Can you use Lysol wipes on wood furniture? Lysol disinfecting wipes are specially formulated to be safe on most finished wood surfaces such as cabinets, tables, and floors. However, they aren't recommended for untreated, unpainted, or unfinished porous wood surfaces.