Pool pumps typically disperse chlorine into the water for you, but it is possible to add chlorine without a pump. The easiest way to do this is with chlorine tablets. They go in a designated floating container and slowly dissolve while floating around the pool. You can also use inline chlorinators.
While a typical free available chlorine level is recommended at 1-3 parts per million (ppm), without the pump or filter, you should maintain somewhere in the 3-4 ppm range to prevent debris, algae and other problems from potentially developing.
Short answer--yes. The first response, however, would be why would you use a pool without a filter? The sand filter or other filtration system is essential to the health and safety of the swimmers. It is also necessary to have a circulation pump for maximum chlorination.
So yes, while it's perfectly fine to run your pool pump without a filter cartridge installed, it's better to have a backup filter cartridge to ensure that you don't have to run it without one.
You can add chlorine in tablets and sticks directly to the skimmer, and they slowly dissolve into the pool water. Liquid chlorine comes in gallon containers. You can apply it by pouring the liquid into the skimmer or directly into the pool water.
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
Shock-chlorination is an essential and effective method of cleaning the pool. But you need to have the pump circulating the water for this to be effective.
A pool can only be safe for swimming without a pump for a few days and a maximum of one week. The definite number of days the pool will be safe will also depend on the temperatures of the water, the weather at that particular time, the level of chlorine, and how clean the pool was before the pump stopped functioning.
Smaller inflatable pools, like kiddie pools, aren't typically treated with chlorine. These pools are small enough to refill with fresh water fairly easily, so small inflatable pool owners typically don't have to deal with chlorine or pH test kits.
Potassium peroxymonosulfate: A less costly, non-chlorine shock. Add it directly to your pool water at any time. Takes roughly 15 minutes to work before you can safely swim.
Intex pools -- the same as with all other swimming pools -- require a filter, pump and the appropriate chemicals, such as chlorine, to keep the pool water clean and sanitary for swimmers.
keep your kiddie pool clean. You can use small chlorine tabs that are meant for a spa tub or small pools. They are 1″ in size and you can use these chlorine tablets for kiddie pools. These should only be used in pools that hold 100 or more gallons of water.
Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.
Factor #2: Frequent Use
If you use your pool or hot tub more than once per day during swim season, you may want to increase your free chlorine testing frequency to 4 or 5 times per week. Perspiration contains bacteria that free chlorine will react with to sanitize your pool.
BUT, if you have to shock your pool during the day in broad daylight, you can still swim after adding shock. It's recommended that you wait one hour after adding shock with the filter running, and then test the water to confirm the pH and chlorine are in the proper range before letting anyone enter the pool.
All pools have the same main components that keep the water moving and clean – a pump, filter, drains and skimmer, return lines and vacuum.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.