Enhanced R-Value and Energy Efficiency: Blown-in insulation significantly improves your home's R-value, which is a measure of heat resistance. This means your home will stay warmer in the winter and cooler in the summer, helping you save up to 30% on heating and cooling costs.
Blown fiberglass insulation scores an R-value of 3.2 to 3.8, making it slightly less likely than rolled fiberglass to prevent the flow of heat into and out of your house. That being said, though, blown fiberglass insulation isn't meant to cover huge areas like rolled fiberglass insulation.
Mold and Mildew Growth
Having too much insulation in your attic can allow for the accumulation of moisture. This leads to mold and mildew growth, which can be extremely bad for your health.
New homes: Insulating attic walls in a newly constructed home with blown-in insulation costs $2 to $4 per square foot. Attic: Insulating an attic using blown-in insulation costs between $3 to $7.50 per square foot.
Also, when laying down additional insulation, work from the perimeter toward the attic opening. Never lay insulation over recessed light fixtures or soffit vents. Keep all insulation at least 3 inches away from recessed "can" lights, unless they are rated IC (Insulated Ceiling).
Removing old insulation is generally recommended if it's damaged, contaminated with mold, or infested with pests. However, if the insulation is in decent shape and just needs a boost, adding a new layer on top can be a cost-effective option.
Best Time of Year to Buy Insulation
In this case, the spring is the best time, because you will also start to see savings in the summer months. The same is true for warmer climates, just different times of year because you'll want the job finished before the heat sets in.
Fiberglass batt is considered to be the best insulation for attics. Compared to other insulation materials, it is the cheapest and easiest to install. Fiberglass batt is also incredibly energy efficient, as it helps to slow the spread of hot and cold air.
Insulation levels are specified by R-Value. R-Value is a measure of insulation's ability to resist heat flow. The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
Heat naturally rises, and without proper insulation, it escapes through your attic, forcing your HVAC system to work harder. 💰 Upgrading insulation can reduce energy costs by up to 30%! ✅ Better insulation = less heat loss in winter and less heat gain in summer.
Both types offer excellent attic insulation and both types will resist fire, moisture, and mold. Spray foam insulation has the highest R-value, but it comes at a cost—you can achieve the same outcome with blown-in fiberglass for a much lower price.
Fiberglass batts offer the easiest way to add attic insulation or just about any area of your home. However, typically batts offer the worst insulation performance for any job.
Blown-in insulation, available in fiberglass and cellulose varieties, generally lasts 20 to 30 years. Fiberglass tends to be the more durable option, while cellulose is more sensitive to humidity, which can affect its longevity in certain climates.
Blown-In Cellulose Particles Are Paper.
Unlike glass fibers, cellulose isn't dangerous to breathe. However, it can irritate your lungs. If you have pre-existing allergies, the dust of cellulose insulation can be obnoxious.
However, insulation can start falling from fiberglass batts after 15 to 20 years, so if your insulation was installed in batts well over a decade ago, it might be time for an inspection or a home energy audit.
Attic insulation costs anywhere from $1,680 to $3,125, depending on the size of your attic and the material used. On average, most homeowners shell out around $2,380. These costs include the insulation materials and installation by a professional.
When blown-in insulation settles, your attic loses insulation performance. Settling compromises the R-value of your insulation.
Yes, it is possible to put too much insulation in a loft or attic.
Before blowing in your insulation, you'll need to create a barrier to keep the insulation from falling into areas where you don't want it, like your walkway or down the attic hatch. You can use a piece of rigid foam and attach it with cap nails.
Can I put plywood over insulation in the attic? Yes you can install plywood subflooring directly over the floor joists and insulation on your floor. You need to install rigid insulation boards on top of the attic flooring joists and then install plywood over the top.
Looking across your attic, if the insulation is level with or below the attic floor joists, you probably need to add more insulation. If you cannot see any of the floor joists because the insulation is well above them, you probably have enough, and adding more insulation may not be cost-effective.
The floor wins every time. Insulating the floor is standard practice for an unfinished attic space. The exception to this rule takes place when families opt to convert an unfinished attic space into something usable or livable.