How long can you leave a pool empty? Well, the minimum amount of time possible in order to minimize the risk of serious damage. Most issues that require a pool drain will take at least a day or two to resolve, but it's recommended to not let it sit empty for any extended period of time.
Modern concrete pools can usually stand being drained for as long as needed, but there'll still be a risk of popping if the ground water level is high. Fibreglass pools are less resilient. The floor may come loose and float to the top when refilled, even after a short period.
Never completely drain a fiberglass or in-ground vinyl liner pool; doing so can damage the integrity of the pool surface or liner in the form of bowing or cracking. The best practice is to partially drain these types of pools. Always complete partial drains by 1/3 of the water at a time.
First, if the draining is done at the wrong time or under the wrong conditions, you can actually risk damaging your pool structure and liner. All the water from your pool needs to go somewhere when it's drained, and that usually means the ground.
If the pool ever needs to be drained to replace the water or to maintain the plaster, it should never be left empty for more than eight to ten days at the most. More than this may cause the plaster to dry out and crack. Keep your pool full for best results.
The answer is always NO. Above ground pools need the weight of the water in them to provide an optimal level of stability. Without water supporting the wall you run the risk of the pool wall coming out of the track. Also without water in the pool the liner can shrink and no longer fit your pool.
Close the pool for winter – but don't drain it.
In winter, the water in your pool is still your friend. Especially when properly winterized, it helps to protect the pool liner, keep it clean and prevent unnecessary damage from debris, harsh weather and other factors.
Pool industry experts recommend you drain your pool and refill it every five to seven years. No two pools are alike, so there is no set number at which you must drain your pool.
Most inground fiberglass and concrete pools are built structurally to withstand the weight of the dirt against them when drained. However, if the groundwater is high enough, it can push the entire pool out of the ground. The pool shell acts like a ship and floats up in the groundwater.
When to Replace the Pool Water
You should replace pool water every five to seven years. As much as possible, you should drain and refill your pool during mild weather. It's to avoid pool damage caused by direct sunlight and heat. Moreover, a pool maintenance company can recommend the ideal time to drain your pool.
Depending on the type of material that your pool is made out of, exposure to the elements may damage it. Because of this, the best time to drain your pool is when the weather is mild. If the temperature will be over 85 degrees at any point in the process, it is best to postpone.
During normal operation, water flows to the filtering system through two or more main drains at the bottom of the pool and multiple skimmer drains around the top of the pool. The main drains are usually located on the lowest point in the pool, so the entire pool surface slants toward them.
Draining a pool can take up to 14 hours, depending on the size, so be sure to drain it on a day when you have sufficient free time. You need to be home to check on the pool, the hoses, and the pump frequently.
Does my pool need to be drained before cleaning pool tile or cleaning pebble-tec? No! - We lower your pool water just enough to expose all the pool tile calcium and pebble-tec calcium. In an effort to conserve water, We Never Need to Drain Your Pool.
While there are many myths about fiberglass pools, the one thing you should NEVER EVER do is DRAIN your fiberglass pool without professional help. Let me say that again, NEVER drain your fiberglass pool for any reason. In fact, we recommend NEVER letting the water level drop more than 2-3 inches below the skimmer!
A common cause of pool collapse is a build up of snow, rainwater, and ice on the pool's cover. The weight of the elements can be too heavy for the pool walls to contain, causing them to fracture and collapse.
A 10,000 gallon pool will take about 14 hours to drain, the maximum rate recommended by the City of Phoenix. It will take twice as long to drain if the pool size is doubled or cut in half.
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the "Drain" setting, to empty the pool water.
It is best to close your pool when the temperature of the water is consistently below 60 degrees. Once the water temperature drops below 60 degrees, microorganisms and algae cannot grow and become dormant for the winter season.
In general, draining this type of pool is the trickiest. Inground pools made of concrete or gunite are susceptible to popping out of the ground if drainage is not done properly. If there has been a surplus of rain recently or your pool is located in a wet area, it is best not to try and drain the pool yourself at all.
Winter Pool Covers also offer protection for an empty pool. Made out of polypropylene fabrics and double webbing, they offer safety and keep most debris from even getting into the pool.
Whether you drained yours partially or completely, the rules for refilling an above-ground pool are the same. At the end of the day, a pool is designed to be full of water.
Brush the walls every week during swimming season while the pump is turned off. A vacuum removes the debris that collects on the bottom. Vacuuming requires moving the vacuum head over the debris on the bottom of the pool until the bottom appears clean.