A 1:1 mixture of cooking oil and white vinegar is the most effective way to remove scratches from wood furniture. Dip a rag in the mixture, and rub it on the scratch. Allow the mixture to sit for 1-2 minutes before wiping away excess liquid.
#2 Use Homemade Polish to Camouflage Scratches
Mix equal parts olive oil and vinegar, which work together to remove dirt, moisturize, and shine wood. Pour a little directly onto the scratch. Let the polish soak in for 24 hours, then wipe off. Repeat until the scratch disappears.
You can fix scratches quickly using simply oil and vinegar from your kitchen! Mix 3/4 cup vegetable oil and 1/4 cup white vinegar in a bowl and wipe the mixture on any wood scratch using a rag or paper towel. This does an incredible job of matching to the existing wood and disguising shallow scratches!
WOOD FLOORS AND FURNITURE
Fill scratches in wood furniture: If your furniture has any scratches or cracks, you can fix them by applying mayonnaise in and around the affected area. Let it sit for a few days if you want to get the best results before wiping off and buffing with a cloth.
And stains, marks and scratches can be removed easily from waxed floors using Murphy Oil Soap.
Aside from vinegar, toothpaste also makes a good household item for removing marks and scratches. The gel-like consistency of toothpaste and its baking soda content makes a good cleaner and scratch remover. Just apply a small amount on the spot.
You can rub out surface scratches in your wooden furniture with a paste made of mineral oil and pumice (available in powder form at hardware and paint stores). Use extra-fine-grade steel wool to rub the mixture into the scratched area. Then wipe it off and buff with a dry cloth.
Gouge: For a deeper scratch or small gouge, rub a matching colored wax filler stick or brown crayon on the spot until the nick is filled. Rub the spot with a soft cloth to remove any excess wax. Deep Gouge: For a deep gouge, fill the hole with matching colored wood putty.
WAXING SCRATCHES AND SCUFFS OUT
Scuffs and shallow scratches can be fixed with a floor wax, many of which are made just for floors. This wax seeps into shallow scratches, filling them up to give you a smooth floor surface again. To apply a wax, simply wipe it onto the damaged area with a clean, dry cloth or sponge.
Refinishing your floors first involves sanding them down enough to remove the blemishes. Next, you'll sand them with fine-grit sandpaper until they are smooth and without any flaws. Finally, apply a new protective seal coating, which will make your bamboo or eucalyptus floor look brand new.
Surfaces that Should Not Be Cleaned with Vinegar
hardwood floors, wood furniture, and other word surfaces – due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
Vinegar makes an excellent wood cleaner because it won't damage wood finish or warp wood like other products do. Cleaning with vinegar is a green alternative to the sometimes toxic and expensive cleaners offered at the store.
Things You Can CAUTIOUSLY Clean With Vinegar
Porous surfaces like wood, stone, and grout are susceptible to damage from acidic cleaners like vinegar, but it can be safely by diluting the vinegar with water or other ingredients.
Spreading mayonnaise over a moisture-damaged finish is more effective than simply spreading oil - oil quickly dries out, whereas, mayonnaise has enough consistency to remain moist. This is important, because the oil needs time to penetrate the finish and do its job.
Wipe out water stains on wood surfaces.
Apply 2-3 tablespoons of mayo on a paper towel and lay the towel over the stain, pressing lightly. Leave on for 15 minutes or longer if necessary.
METHOD 2: Use mayonnaise to remove water stains from wood.
The oil in the mayonnaise should seep into the finish, displacing the lodged moisture. Dab a bit of mayonnaise onto a rag, then gently apply it directly to the water-stained area.
A combo of baking soda and olive oil can help reduce and remove scratches from wood. Vacuum your floor thoroughly, then apply baking soda moistened with several drops of olive oil to marred areas. Wait five minutes, then buff in gently, using a soft sponge. Clean thoroughly with a damp cloth and dry with a towel.
But buffing out car scratches with any old toothpaste will only make the situation even worse. It is always recommended to use 'whitening' toothpaste to remove scratches from your car. 'Whitening' toothpaste works best because it contains small, barely perceptible abrasives.
Paste-based toothpaste acts as a mild abrasive that levels out the scratch, removing it or making it less noticeable.