This product contains methanol which can cause intoxication and central nervous system depression.
SWALLOWING: Swallowing small amounts of this material during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful. This material can get into the lungs during swallowing or vomiting. This results in lung inflammation and other lung injury.
If there is no need to repair deep gouges in the wood (with traditional sanding techniques), deglosser, also known as ``liquid sandpaper'' can be a perfect option to dull that finish. Apply the deglosser with a green scouring pad, lightly scrubbing the deglosser with the grain of the wood.
Since the chemicals in the liquid sandpaper solution give off very strong fumes, make sure to work in a well-ventilated area and use gloves and eye protection. In addition, the solution is extremely flammable, so keep away from high heat and fire when applying the liquid sandpaper and dispose of the used cloths safely.
Let the deglosser completely dry and maybe even let it sit for a few hours to a couple of days to make sure there are no damages to the wood or quality of the item. You can even apply a small amount of paint, stain, varnish, etc., to the area after the deglosser dries to make sure the desired results are achieved.
Deglosser/Liquid SandPaper
You can use a primer after this step or go straight to painting. That is up to you and depends on your piece and your end goal. The deglosser I use is also a degreaser so it helps clean your piece as you degloss saving you a step in the process.
Sand and a piece of leather or cloth, Pumice (a porous vulcanic Rock), Walnut Shells, Rottenstone (similar to Pumice), Wood Shavings, Corn Cobs, a Wood File, Scraping, Burnishing, or even building a primitive sanding tool are good alternatives to sandpaper.
In fact, liquid sandpaper is also known as deglosser or deglossing solution made from chemicals such as naphtha, ethyl acetate, and ethyl alcohol, among others. Liquid sandpaper is widely used for removing high-gloss paint from walls and other surfaces.
Liquid sandpaper, a.k.a. deglosser, is a chemical that can be used to rough up existing paint on walls and other surfaces by removing the gloss, making it possible to paint over what's left on the wall after use. This is good for hard to reach places or an object that you may feel would be awkward to sand.
Plastic / rubber compatibility – Care needs to be taken when cleaning plastic or components, rubber gaskets and seals. If the degreaser is incompatible with the plastic, it can craze (create small cracks), embrittle, or soften the material. Rubber seals may swell, shrink, or dissolve.
Use a coarse, lint-free cloth to apply product. Klean Strip® Liquid Sandpaper can be used on latex paint.
According to the National Library of Medicine (NLM), the volatile organic compounds (VOCs) in paint fumes can lead to several different problems. Short term exposure to VOCs can include irritation, headaches, dizziness, visual impairment, and temporary loss of memory. Some of these can be more severe than others.
TSP is commonly used in cleaning products to dissolve and remove oily residues from surfaces such as walls, floors, and kitchen appliances. TSP can be effective for stripping glossy paint from surfaces.
Perhaps the most crucial benefit of using a deglosser is the improved adhesion it provides for your new paint or finish. It chemically etches the surface creating a great foundation for paint to grip onto. This can result in a more durable, longer-lasting finish that's less likely to peel or chip over time.
Fill a bucket with water and add a small amount of automotive soap. This will provide the lubricant for the sandpaper to prevent it from burning the paint when force is applied.
Body shops use wet sanding to even out new paint, to smooth out small paint runs and sags, or remove debris that fell on the paint while it was wet. By following up the wet sanding with a rubbing compound, the paint will virtually come back to life and give the vehicle a smooth, glassy look.
Wet sanding also creates less airborne dust, which makes it safer for indoor use and provides a smoother finish, making it ideal for high-quality surfaces like auto bodies and fine furniture.
Medium (80-120 grit): Perfect for smoothing surfaces and removing small imperfections. Fine (150-180 grit): Used for the final sanding before painting. Very Fine (220-240 grit): Ideal for sanding between coats of paint or primer. Extra Fine (280-320 grit): Best for achieving a smooth finish on the final coat.
PSA: I've just discovered my wife's nail files are amazing for sanding prints. If you don't have these yes, do yourself a favor and get some. That will be all.
Deglosser Is a Superior Alternative to Sandpaper When You're Refinishing Furniture. Deglosser is the dust-free sanding alternative for surface prep that's water-based and easy to use.
Even though it started to work right away you still want to grab a paint brush (I use a chip brush) and spread a thick layer of liquid sandpaper over the surface. And let it sit for 30 minutes. After 30 minutes the clear coat will be almost completely frosted or hazy looking. Now you are ready to paint.
Use 91 percent rubbing alcohol, a degreaser/deglosser that evaporates and won't leave a residue behind.