MEDIUM-DUTY pressure washers in the 1,800 to 2,000 PSI range can tackle bigger projects like large SUV's, RV's, siding and fencing, decks, garage floors and driveways.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster.
Choosing a Pressure Washer
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi). Determine whether you will rent or buy your machine.
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.
Selecting a pressure washer with a range of 2,000 psi to 4,000 psi will give you the most effective power for removing peeling paint. With pressure washers, as with all power equipment, always wear protective goggles and closed-toe shoes. Prepare the area around the structure you are working on.
Softwood decking - For softwood decks like redwood or cedar, 1,200 PSI is enough pressure. Anything greater than that and you risk damaging or removing the wood, leaving behind a raised grain.
Electric pressure washers are lighter, more nimble, and far quieter than their gas counterparts. And like all electric and battery-operated tools, they start instantly and are significantly better for the environment because they don't produce any emissions.
2,000 to 3,000 PSI
Good for cleaning concrete surfaces with light to moderate oil stains, most automotive cleaning, pools, many industrial applications.
Any machine capable of producing at least 1,500 pounds per square inch (psi) of pressure can clean concrete, but the work will go much faster if you choose a model producing 2,500 to 3,000 psi, like the gas-powered option below.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
You'll need a power washer that provides a force of 3,000 PSI or more. The higher the pressure, the better and faster is the cleaning. If you want to use a lower pressure on certain surfaces, you can always attach a larger spray tip to it.
1000 to 1500 psi pressure is easy to mange and will not cause damage to pavers and paving stone. A low pressure washer is also safe for mortared flagstone and slate patios and walls.
For a typical car, use 1,200 to 1,900 PSI and 1.4 to 1.6 GPM for 1,900 to 2,800 cleaning units. Anything above risks the car's coating and paint.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
Look for a minimum of 15 PSI, with some applications, such as clear coat, better-suited to 20 or 25 PSI. HP: For auto painting, a 10 HP compressor will typically suffice. However, higher HP compressors may operate more efficiently and can be used for other tasks.
The answer is yes – you can power wash with just water! However, there are a few things that you need to keep in mind when doing this. In this blog post, we will discuss the pros and cons of power washing with water, and we will also give you some tips on how to do it correctly.
If you're wondering whether pressure washing can damage wood, the short answer is yes, but only if you're not careful. That's why it's best to leave it to the professionals to pressure wash wood surfaces for you.
Determine How Much Pressure Is Needed
Other sources say you should have between 2,000 and 4,000 PSI. Based on our experience, we recommend getting a pressure washer with at least 3000 PSI. It requires a lot of pressure to break the chemical bond between the surface and the paint.
Your pressure washer should have a minimum pressure rating of 3000 psi to effectively clean your sidewalk. There are a few situations where a higher pressure rating might be needed, but exterior cleaning experts all agree and recommend that 3000 psi is appropriate for residential use.
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.