The first thing you need to know is that there is no such thing as a universal key that will open all machines. For security purposes, vending machine keys are all keyed differently.
Technically, vending machines tend to use the same key but vary depending on the model. Manufacturers produce the same key for vending machines of the same model. Their keys are designed with a unique key code to use for each model.
The term "universal" means that one key will work for several machines, allowing a service technician or operator to only carry one key rather than a full key ring. However, every universal tubular key will not work in every barrel lock, as the pin combinations vary with seven, eight or 10 pins.
If you have lost your key you can acquire a new one through the vending machine distributor through which the machine was originally purchased. A list of distributors can be found online. Contact the distributor and tell them that you need a replacement vending machine key.
Dozens of vintage Chicago Lock “gumball machine” brass keys are available on websites like eBay, but no, there is not a universal key that opens all gumball machines (that would defeat the purpose of putting a lock on the machine in the first place!), so buyer beware: not all gumball machine keys are the same.
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.
For security purposes, vending machine keys are all keyed differently. The locks on these machines can only be opened by a key that has a compatible "key code". Key codes are what distinguish one key from another. There is no key on the market that is compatible with all key codes.
How much does it cost to make a replacement vending machine key? We charge$12 per key but copies range from $8-$16 nationwide. If you've lost all your keys and need a locksmith on site to make a replacement key or install a new lock, your total fee should be $87-$122.
Circle locks, also known as tubular locks, work differently from standard locks. They are typically used in public places because they cannot be easily opened. However, you can open a round lock without key by picking it with a circle lock pick or with a pen.
When is best to use them? A tubular lock is also known as a radial lock, barrel key, Ace lock or a circle pin tumbler lock where there are a variety of pins (between 4-10), arranged in a circular pattern with the matching key in a tubular or cylindrical shape, which led to being referred to as circular key lock.
Using a lock pick is the only verified way to open a tubular lock without the key so, if you have time to spare, purchase a pick to open your tubular lock. If you're in a hurry, you may be able to pick your lock with a ballpoint pen, but this method is less guaranteed than using a pick.
Master key: The master key can open all locks you have in your residential or commercial property.
Tubular pin tumbler locks are often considered to be safer and more resistant to picking than standard locks. This is primarily because they are often seen on coin boxes for vending machines and coin-operated machines, such as those used in a laundromat.
Contrary to popular belief, dimple locks are neither more secure or less secure than other conventional pin tumbler locks. This impression might arise from the fact that dimple keys have dimples cut into the grooves while standard keys do not.
Quite simply the ultimate answer to picking tubular locks. 7-, 8-, and 10-pin tubular locks have the same keyway size, but a different number of pins. Even though the keyways are all the same size, the spacing of the pins is different. This is why you'll need different tubular lock picks to handle different locks.
Step 1: How a Tubular Lock Works
The shape of the key is circular, open in the center, and has grooves that are cut into the outsides of the circular shape. Once the key has been fitted correctly in the keyhole, it will depress the key pins to the correct depth and the key can be turned opening the lock.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
Requirements for Pepsi machine placement
To get a vending machine, your location must meet the qualifications below: For a soda machine: Office/manufacturing - at least 40 full-time employees. Retail – 60+ employees for break room placement; 100+ if machine is accessible to the public.
The “bump” in “key bump,” the dictionary explained, can be defined as “a small quantity of an illicit drug when inhaled in powdered form at one time.” Thus, an English speaker can “refer to 'small amounts of drugs sniffed off a key' as 'key bumps,' ” Merriam-Webster noted.
Step 1 Make the Bump Key
Go to the any store that has blank keys. Wal-Mart and Home Depot have them. They look like this, without teeth at all: A bump key is made by using a triangular file (they're at every hardware store…
Bump keys are keys cut to a special design that will allow them to be used for picking pin-tumbler locks. Pin-tumbler locks are the world's most popular lock, and these include exterior door entry locks for homes. The process of gaining entry using a bump key is called “bumping,” and it can be very effective.