C - 150° F - About 1-1/2 seconds. B - 140° F - Less than 5 seconds. A - 130° F - About 30 seconds. HOT - 120° F - More than 5 minutes.
The next highest setting is usually either labeled as “Hot” or with a triangle, and this setting should correspond to 120 degrees. From there, you will typically see three higher settings marked either as 1, 2, and 3 or A, B, and C that correspond to 130, 140, and 150 degrees, respectively.
These are usually labeled A, B, C or 1, 2, 3, and the last setting is always “Very Hot.” The A or 1 setting should be around 130 degrees, B or 2 is 140 degrees, C or 3 is 150 degrees and “Very Hot” is always 160 degrees. Again, we never recommend setting the unit above the B or 2 setting to prevent scalding.
Here is what temperature each letter stands for: Hot- 120 degrees. A- 130 degrees. B- 140 degrees. C- 150 degrees.
That should be plenty hot enough for most uses in your home. Now, some water heater temperature controls come with settings that read “A-B-C” as opposed to numbers. Generally, A means 120 degrees, B means 130 degrees, and C means 140 degrees. Refer to your water heater's manual to confirm these settings.
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire's disease.
The best temperature setting for a hot water heater is between 120 and 140 degrees. Below 120 degrees, bacteria can develop in the stagnant water sitting in the tank. Above 140 degrees, the water is so hot that you and your family members can be at risk for scalding in as little as two seconds.
The best setting for gas water heaters is around 115 to 120 degrees Fahrenheit. Oftentimes, water heaters will have additional options to either lower or increase the temperature of the water inside.
120 Degrees is the recommended max temperature for water heaters, according to both the American Society of Sanitary Engineering and the US Department of Energy. Firstly, setting the max temperature to 120 degrees prevents the water from scalding your skin. At 140 degrees, water can burn the skin in seconds.
Here are some common heat up times for different water heaters, assuming the appliances are new and properly sized for the home: Electric storage tank water heater: 60–80 minutes. Propane storage tank water heater: 30–40 minutes. Propane tankless water heater: 0 minutes.
So, what is the best temperature range for your water heater? The EPA recommends 120 degrees because it's hot enough to keep diseases at bay but not hot enough to cause scalding. This setting will also supply enough hot water for most small families and is relatively energy efficient.
Although some manufacturers set water heater thermostats at 140ºF, most households usually only require them to be set at 120ºF, which also slows mineral buildup and corrosion in your water heater and pipes. Water heated at 140ºF also poses a safety hazard—scalding.
According to most dermatologists, the ideal shower temperature is anywhere between 98°F (37°C) and 104°F (40°C)—and no more than 105 °F (41°C). Rinsing under lukewarm water allows you to stay comfortable and maintain your body temperature while reaping all the benefits of both hot and cold showers.
Raising the temperature setting on your water heater ultimately makes your hot water supply last longer. It will ensure everyone gets a hot shower, with plenty leftover to run your dishwasher and washing machine.
Anyone can be burned from hot water, but children, the elderly and people with sensitive skin are most vulnerable. For these populations, it's recommended to keep the water heater temperature at 120 to 125 degrees.
B - 140° F - Less than 5 seconds. A - 130° F - About 30 seconds. HOT - 120° F - More than 5 minutes.
At 150 degrees, which is definitely way too hot, it takes only seconds for the water to cause third-degree burns. This is why a water heater temperature of 150 degrees is especially hazardous in residences with children or the elderly.
What is legionella? Legionella bacteria is commonly found in water. The bacteria multiply where temperatures are between 20-45°C and nutrients are available. The bacteria are dormant below 20°C and do not survive above 60°C.
Most homeowners should flush their water heaters every 6 months or so, but if you have extremely hard water, you may want to do it more often. Flushing your hot water heater could be necessary as often as every few months depending on the mineral content of your local water supply.
Consider putting your water heater in vacation mode if you plan on leaving your house alone for a few days or longer. Whether you're going on a short business trip or a longer vacation, setting the vacation mode has the potential to: Save on energy costs. Save energy resources (fuel)
According to Centers for Disease Control and Prevention (CDC), water temperatures ranging from 130 to 140 degrees Fahrenheit(°F) can eliminate most of the harmful bacteria. However, be warned that these high temperatures can also increase the risk of scalding.
To help prevent bacteria growth, the ASSE recommends keeping the water in your water heater tank at about 135 - 140 degrees Fahrenheit.
While today's water heaters are better designed than older models, they still require regular maintenance in order to prolong their lives. With regular inspection, draining, and flushing, you can expect a gas water heater to last anywhere from 8-12 years and an electric water heater to last anywhere from 10-15 years.