Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
Use a Magic Eraser to remove stains and soap scum
If you are looking to avoid using chemicals altogether or if marks are particularly rugged, then cleaning with a Magic Eraser can help achieve the perfect shine with no extra product. 'Use a Mr. Clean Magic Eraser to quickly scrub your porcelain sink.
The abrasive nature of the Magic Erasers can also scratch up the finish of your stainless steel sinks and appliances, especially if you use them and press down too hard. Too much scrubbing can cause the high gloss finish that seals most stainless steel appliances to break down.
Toilet Bowls.
Grab some gloves and use a Magic Eraser to go to town on toilet bowl stains. Some users even recommend cutting a piece off and letting it dissolve the bowl to remove that unsightly ring all on its own.
Add undiluted white vinegar to a spray bottle and spray the sink, then use a non-abrasive sponge and circular motions to clean the porcelain.
Abrasive tools: Abrasive tools like scouring pads and steel wool could cause unsightly scratches to form on porcelain sinks. Abrasive cleaners: Abrasive cleaners that contain harsh chemicals can stain, scratch, or damage the finish on porcelain sinks.
Hydrogen peroxide, the active component of oxygen bleach, gives baking soda an added punch to clear any yellow stains. For antique or colored porcelain, hydrogen peroxide and oxygen bleach are the most effective household cleaners for tough stains.
Magic Erasers are abrasive and shouldn't be used on wood or any high gloss surface, including countertops, because they can dull the finish. Use Magic Erasers with caution on painted surfaces. Always spot test, no matter what you're cleaning.
With the legendary cleaning power of his mighty Magic Eraser, you'll have a clean bathroom sink in no time and with less elbow grease. So, roll up your sleeves and get ready for this sink cleaner to power through even the toughest of stains, including soap scum and rust.
This might blow your mind but Mr. Clean Magic Erasers and generic melamine foam don't have a chemical cleaner or soap inside them, it's literally just an abrasive foam that makes them work.
Magic Eraser when mixed with water essentially turns into sandpaper. Such abrasive material can remove the enamel on the teeth causing damage, sensitivity and lead to decay.
Clean Magic Eraser Bath is safe to use on acrylic tubs, but definitely skip the bleach. If you're going to use a ready-made cleaner on your acrylic tub, carefully read the label to make sure it won't damage the tub's surface.
Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you're satisfied. Rinse well.
Magic Erasers will clean just about anything, but if you. need a little more oomph, soak that sucker in white. vinegar.
Clean sells a line called Magic Erasers, and Scotch-Brite offers a product called the Easy Erasing Pad. The secret behind these types of erasers is a material commonly called melamine foam. With just a little water, melamine foam can dig in and destroy stains that other products can't touch.
Magic Erasers can be used dry, but adding water to the sponge will help it absorb dirt. You should perform a spot test before you use the Magic Eraser, as the very fine, sandpaper-like surface can alter the finish on some surfaces.
A melamine sponge is more dense than your average cleaning sponge and its tiny pores make it a light abrasive, not unlike that of an extra fine sheet of sandpaper. The best part is, you can find melamine sponges -- very similar to those that Mr. Clean uses -- on eBay and other online stores in bulk.
Put a cup of hydrogen peroxide in a spray bottle. Spray evenly over the porcelain. Let the hydrogen peroxide sit for 15 minutes to an hour. Rinse and buff with a microfiber cloth for a clean, bright shine.
There are a few ways to restore your porcelain tile after you've come across a stain. You can try tackling the spot with some hydrogen peroxide or by using a steam cleaner. For more difficult stains, consider trying diluted muriatic acid, an industrial-strength solution professionals have been using for decades.