A running toilet will rarely stop on its own. Sometimes, jiggling the toilet handle will temporarily seal the flapper back into place at the bottom of the tank. But usually, you will need to replace a few parts to fix the problem.
“My toilet keeps running.” We've heard this many times from homeowners, and it's never something you should ignore. Water running in a toilet constantly is usually a sign that there's a leak or toilet repair issue. And the longer you put it off, the more damage can occur.
A running toilet can quickly become a flooding toilet. If you have a septic tank, that excess water risks flooding the tank, which can result in the saturation and failure of your drain field. The bill for this degree-of-mishap will be much higher than merely fixing a toilet that will not stop running.
A constantly running toilet also presents an increased risk of flooding.
This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat and then replace the flapper if it's worn or damaged.
What happens if a toilet runs all night? If a toilet runs all night it will waste water and increase your water bill. Excess water can potentially flood your septic tank and lead to failure and saturation of your drain field.
A continuously running toilet can waste up to 200 gallons a day or more depending on the volume flow down the drain. This can cause a terrible increase to a family's typical water use, so fix toilet leaks as soon as possible. Some leaks are easy to find, such as a dripping faucet or running toilet.
2. The Flapper Is Leaking and Needs Replacing. Perhaps the most common reason for a running toilet is an old flapper that needs to be replaced. When flappers get old, they don't seal the way they should, and this allows water to pass constantly from the toilet tank into the bowl.
Some toilets will stop themselves from overflowing, but older toilets might have a hard time getting rid of the extra water when they're clogged, and in that case, it's important to know how to turn off the water to prevent further damage.
Thus, a running toilet with a moderate continuous leak could land you with a monthly water bill that is $1,555 more than you expected. A large continuous leak could set you back about $3,110 in a month. As you can see, a simple toilet problem can cost big money if it's not addressed right away.
If you're experiencing a running toilet, there are a few potential fixes that you can try before calling in a plumber: Adjust the Flapper Valve: Sometimes, the flapper valve just needs a simple adjustment to fix a running toilet.
For those on septic systems, a running toilet introduces additional risks. Constant water flow can flood your septic tank and can eventually cause the drain field to saturate and fail.
The short answer is:
To fix a running toilet, you'll need to replace the flapper. Before you do that, though, it's a good idea to check the other parts of the toilet to make sure they're not the problem. First, check the water level in the tank. If it's too low, the toilet will run.
A toilet that runs can go through hundreds of gallons of water in a day, equaling hundreds, maybe even thousands, of dollars over time. Most of the time, the root of the issue isn't so serious. More often than not, the flapper valve could need adjustment, or you may need to replace the toilet fill valve.
A running toilet is typically caused by the overflow tube, flush valve, or fill valve. Check the water in the tank to determine if it is running into the overflow tube. If the water is running into the overflow tube, the water level might be too high, or the overflow tube might be too short for the toilet.
A call during regular business hours for a plumber to visit is likely okay. Emergency response is warranted if your toilet is gushing water or the leakage is intense, no matter where it's coming from. When large volumes of water are released, flooding and water penetration into walls and flooring happen rapidly.
Research from WaterSafe and Wessex Water reveals that a constantly leaking toilet can waste between 200 to 400 litres of water every day. This is equivalent to an additional £300 to £400 on your annual water bill.
Substances like toilet paper and fecal matter will eventually dissolve within the toilet drain and clear the clog organically. However, blockages made from insoluble materials won't resolve on their own and typically require you to fix the clog manually or contact a professional before they worsen.
No need to worry, a running toilet is usually a simple fix. The three most common causes are a broken or dirty flapper, too long or too short of a chain between the flush lever and the flapper or a float that is out of position.
The most common cause for a high water bill is running water from your toilet. A continuously running toilet can waste up to 200 gallons a day or more depending on the volume flow down the drain. This can cause a terrible increase to a family's typical water use, so fix toilet leaks as soon as possible.
Ghost flushing, or phantom flushing, occurs when your toilet tank refills independently without anyone pressing the handle. Water leaks from the tank into the bowl, causing the fill valve to activate periodically to refill the tank. It's similar to your toilet flushing itself, but it's just refilling.
THREE REASONS TOILETS OVERFLOW
An overflowing toilet is caused by one of three things: a clogged or blocked drain that doesn't allow for a proper flush, an improperly adjusted float that allows the tank to overfill or a blocked vent pipe that replaces the air in the pipe after each flush.
Also, small water leaks can quickly add up to hundreds of dollars on your bill, so be sure to fix leaky faucets as soon as you see them. If you live in an apartment or condo, a running toilet may also cause your electric bill to go up.