Once you've activated the micro-scrubbers inside, your Magic Eraser is good to go. Start by swiping it firmly across the desired surface. In just a few swipes, you should start to see grout messes and buildup begin to disappear!
Here's the secret: magic erasers! I know there are grout pens out there that whiten grout, but that's just paint. I want to actually clean my grout. Magic erasers get the job done, and they do it quickly and relatively painlessly.
So, when you start noticing dirty feet, you know it's time to call on Mr. Clean®. His best way to clean ceramic tile, especially when dirt gets stuck in hard-to-reach places, is with the Mr. Clean Magic Eraser Extra Durable.
If you're looking to DIY, you can make your own solution of cleaner using distilled white vinegar. Used in a mix of 3 parts vinegar and 1 part water, the solution can break apart grout haze, making it easy to scrub off.
Different ways to remove grout haze
The first thing to try is to clean the tiles with a scouring pad and lukewarm water. If this does not work completely, use a mixture of 50% water and 50% vinegar. The acid dissolves the lime residues that make up a grout haze.
To clean grout haze all you need is some simple white distilled vinegar, warm water, a bucket, scrubby sponge, and a mop. Start by mixing a solution of one part vinegar to four parts warm water in your bucket. Next mop away the haze on the floor.
Magic Erasers are abrasive and shouldn't be used on wood or any high gloss surface, including countertops, because they can dull the finish.
Make sure your tile surface is completely dry before you attempt to remove any haze. This typically takes about 24 hours. Consult your installation professional—or, if you DIY-ed it, your grout's packaging—for the exact amount of time. But do not wait more than 10 days to remove grout haze.
They say it's “grout haze:” the silent enemy that can ruin any beautiful tile surface, which doesn't discriminate against color, material or size. It can strike any floor or wall — from porcelain to natural stone. Some grout haze problems result in the worst scenario of all, “picture framing.”
Just a few more important points: As the grout can absorb the soap as well as a stain, do not clean with oil or wax based cleaners (Murphy's Oil soap, Pine Sol, etc.). These products will leave a waxy or oily film in the grout.
After MAPEI Flexcolor CQ grout is used, a haze can appear on the tile surface. Typically, this can be remedied using UltraCare® Epoxy Grout Haze Remover and a light-duty scrubpad.
Magic Erasers don't magically erase everything — here's where not to use them: Shiny painted, enameled, sealed, or varnished surfaces. Magic Eraser can strip away the finish.
Magic Erasers will clean just about anything, but if you. need a little more oomph, soak that sucker in white. vinegar.
And remember, you can also use Magic Eraser to clean other surfaces too. Whether you need to know how to clean a shower, bathtub, sink or countertop, Mr. Clean knocks out tough dirt all around your home.
Magic Erasers can be used dry, but adding water to the sponge will help it absorb dirt. You should perform a spot test before you use the Magic Eraser, as the very fine, sandpaper-like surface can alter the finish on some surfaces.
Luckily, you can remove those stubborn stains by hand with nothing more than a damp Magic Eraser. Then make sure to rinse with soap and water after.
You may also find that as you use a magic eraser that it leaves behind a white residue on the surface you are cleaning. However, this white substance is harmless and can be removed easily by rinsing it away with water, or wiping the area with a damp cloth.
However, don't wait too long. It is best to clean grout haze sooner rather than later because the haze will become more difficult to remove with time. Aim to do it within 10 days of grouting. Otherwise, you might have to use harsher cleaners or even be stuck with some haze that doesn't fully go away.
Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout. Just mix half a cup of baking soda with a quarter-cup of hydrogen peroxide and apply the paste to your tile grout with a brush. Wait five minutes for the stains to lift and the grout to whiten before rinsing.
The most common reason is moisture from the ground below the slab, but grout may also turn white from the rain in outdoor installations, or in rare cases from water used to clean the floor.