Make sure the User Code is correct and that the Kwikset button is pushed after entering the User Code. If the door still won't unlock, use a key to unlock the door. Call technical support for further troubleshooting.
My Keypad Is Unresponsive
Test each button on the keypad (one at a time), and listen for a beep as each button is pressed. If beeping is not heard on all buttons, replace the batteries. If battery replacement does not solve the problem, contact Kwikset Support at 1-866-863-6584.
Check that the LED option is turned On in the Kwikset App. The Status LED is set to On by default. Check that the batteries have power, are inserted correctly into the battery pack, and that the battery pack is inserted correctly.
Here is what usually causes a Kwikset lock to not work after a battery change: Batteries Incorrectly Installed. Dirty or Corroded Connections. Technical Glitch in the Lock.
The battery is too low to lock the door. This is indicated by the Checkmark and Lock symbols flashing simultaneously five times with five beeps. Remove the batteries and replace with a fresh set. The mounting plate is placing tension on the torque blade.
Door lock problems are often caused by a malfunctioning lock mechanism or latch assembly, but there are several common reasons why locks stop working: The lock is dry or dirty. It doesn't fit in the door properly. The latch and strike plate don't align.
There's a chance that your phone simply hasn't updated its location status in a while. If this is the case, Smart Lock will stop working, as Trusted Places needs a fairly recent location report before it will unlock your phone.
Make sure the User Code is correct and that the Kwikset button is pushed after entering the User Code. If the door still won't unlock, use a key to unlock the door. Call technical support for further troubleshooting.
Replace batteries with new ones to ensure that lock is properly powered. Typical battery life based on 10 entries per day is 10-12 months if the door is properly aligned and the lock does not encounter interference in lock/unlocking the door.
How do I know when the batteries are running low on my Smartclode 909/910 deadbolt? There are two low battery indicators on the unit. The LED light on the interior side of the lock will flash red when the batteries are low. The keypad will also flash red when the batteries are low.
The battery is too low to lock the door. This is indicated by the Checkmark and Lock symbols flashing simultaneously five times with five beeps. Remove the batteries and replace with a fresh set. The mounting plate is placing tension on the torque blade.
Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 3. Press the Program button once more. When the LED flashes green and you hear two beeps, the lock has been reset.
No, user codes will not be lost if the batteries die or are removed.
The lock should beep twice when it unlocks and once when it locks. It will also beep if there is a warning such as a low battery or a jammed bolt.
Typically, battery life ranges from 6 months to 1 year.
...the lock itself is so weak that a 10 year old kid can slam a screwdriver in it and force the cylinder to turn and unlock and be in your house in a matter of seconds... Any thief with a "bump" key will open this 200+ dollar lock in 5 seconds... Kwikset locks can be easily unlocked with a blank and a screwdriver.
Check door alignment. Even the slightest misalignment between the door bolt and the strike plate hole can cause increased friction, which requires more power to successfully lock and unlock. This is by far the most common contributor to decreased battery life and should be assessed first.
Factors like the weather, damage to the key, and even a buildup of dirt and grime inside the locking mechanism can all stop a door from locking. If you're having trouble locking your front door on a regular basis, you should consult a locksmith as soon as possible.
Check for low batteries. If the red light on the back of your door lock is blinking or if you have a low battery alert on your touchscreen panel, you'll need to replace your batteries with four new AA batteries. If the key doesn't turn smoothly, check for physical obstructions to the lock or in the door jamb.
A faulty central locking system might be due to several reasons, such as a blown fuse, faulty solenoid, or electrical wiring issues. Also, it's good to remember the fault might not be with the central car locking system but the key fob instead; over time, fobs require battery changes.
Your eufy Smart Lock will give you low-battery warnings for multiple weeks before it loses power. However, if your Smart Lock dies entirely before you can replace your batteries, your key will still work. You can use the key to lock and unlock the door.
Eventually, after many months of safeguarding, that smart lock battery will drain. What happens if your smart lock battery dies? The good news is that we call these locks “smart” for a reason. Before their batteries die, most smart locks will let you know that they're running low on juice.
Like any other wireless technology, smart locks are at risk of being hacked. Thieves use different hacking devices depending on the type of connection – Bluetooth, WI-Fi, or Z-wave. A lot of information on how to hack smart locks can be found on the internet these days. However, it's not as simple as it appears.