Bolt cutters are ideal portable hand tools that are useful for cutting locks, chains, fences and bolts. Around the home there are many uses for bolt cutters. They are tough tools that will work in any situation a small section of (usually cylindrical) metal needs to be cut.
Large bolt cutters can get through thick pieces of metal, but sometimes you need a smaller bolt cutter for things like, well, bolts. It can also be used to cut threaded rods, chains and wires. It's a convenient handheld tool that can be used with one hand and kept in a pocket. The soft-touch grip makes it easy to use.
Yes, bolt cutters are an effective tool you can use to cut off a lock. Choose a pair of long-handled bolt cutters and place the shackle between the blades. Squeeze the grips of the bolt cutters together until they cut through the shackle. Then, simply remove the lock.
Try bolt cutters.
You can use this tool on the shackle or on an attached cable. If the lock is attached to a cable, you may have better luck cutting the cable than the lock. If you want to try to cut open the lock itself, cut the shackle. This will not work on most master locks, as they are made of case hardened steel.
Bolt Cutters
Ensure when you select a bolt cutter you pick one that is capable of cutting steel and always wear safety glasses while using this tool. The person who is handcuffed cannot use this tool on themselves, but the bolt cutter can safely be used to remove the wrist cuffs.
ABUS Granit™: one of the world's most secure padlocks with a tensile resistance of over six tonnes. Granit locks have a tensile resistance of over six tonnes, making it almost impossible for attackers to release the shackle from the lock body by force.
Large bolt cutters, which can be as long as 48 inches, can handle hardened steel rods, heavy chains, and thick threaded cable up to 7/16 of an inch in diameter.
Cheap Chain Cuts Easily
A $20 bolt cutter cuts easily through chains, cables and padlocks up to 3/8 in. thick.
Bolt cutters will easily cut through cable locks, but it's worth using a cable extension to deter chancers! So if you want your bike lock to put up a fight against bolt cutters, get one made with hardened steel, and get the thickest possible option.
After using your bolt cutters for a while, you may notice that the blades have small dents and chips in them, which can often occur when they are used to cut through hardened steel. You can solve this problem by sharpening them.
Manoeuvre the cutters to the deepest possible position on the shank of the bolt, screw or nail for the strongest cut. If a bolt is fastened too tightly for you to access the shank, you will have to cut the head instead – aim to cut as close to the bottom as possible to keep your tool from slipping.
Use Bolt Cutters
If unravelling the fence isn't enough, you can use a pair of bolt cutters as well. There are a variety of tools you can use to cut through a chain link fence. However, bolt cutters are one of the cheapest and easiest to use. Most DIYers can easily get their hands on a pair.
The position of bolt cutter blades can be adjusted using either the jaw adjustment bolts, located on the plate that is mounted across the two jaws, or the neck adjustment bolt, located near to where the blade joins the handle on one side of the tool.
Titanium has a tensile strength of 63,000 PSI. Its tensile-strength-to-density ratio is higher than any natural metal, even tungsten, but it scores lower on the Mohs scale of hardness. It is also extraordinarily resistant to corrosion. Chromium, on the Mohs scale for hardness, is the hardest metal around.
Bolt cutters' blades are flat. These are made to cut through heavy metal, like locks, cables and heavy wiring. Plus, they can also be used for cutting wood, like branches or dowels. Bolt cutters have handles up to 4 feet in length, and generally, the longer the handle, the more force that can be applied.
This Stanley padlock is of security grade 4. Its body which is laminated hardened steel protects it against physical attacks. Since the shackle is also made up of hardened steel, the latter will resist other kinds of attacks such as cutting and sawing.
The August Smart Lock is almost completely safe from the lockpicking . The HYT Chain Key blends the inaccessibility of the design with one unique type of key and keyway. The EVVA MCS is another magnetic lock but much more complex. The Shi-He Chi-Me U-lock is very odd and very hard to lock pick.
One of the most common (and easiest to pick) locks is the pin-and-tumbler, which is a type of cylinder lock. Cylinder locks are used in most deadbolts. When picking a pin-and-tumbler lock, put the tension wrench in the keyhole and turn it as if it was a key.
The hard metal shackles on Brink's padlocks take great force to cut, and they often break apart violently when they give way.