Noisy pipes in the form of rattling, whistling or squealing are often a result of loose fasteners and hardware, such as a loose washer. Excessive wear may result in worn washers and loose pipes. As water flows through these, they move and come in contact with components around them.
Squeaking or whistling noisy pipes indicate something is wrong with the flow of water through the pipes. There could be an obstruction in the plumbing line. There could be a defective washer or aerator if the sound is coming from a faucet. Your shut-off valve may be partly closed.
Typically, banging noises coming from your pipes infer an issue with water flow or water pressure. Two of the most common causes are water hammers and trapped air bubbles. A water hammer, also known as hydraulic shock, occurs when fluid in motion is suddenly stopped when a faucet or valve is shut off.
Pipes that are loosely attached can vibrate due to water pressure and cause knocking noises. You can reduce noise by securing the pipes with straps or tightening loose straps, or by wrapping pipes with insulation.
One of the earliest signs of breaks or leaks is unusual noise. Strange noises like trickling, gurgling, or hissing can hint at a leak. The volume of the sound typically indicates the severity of the problem, but not always. Volume can also increase or decrease depending on the diameter of the affected pipe.
If your pipes are making a rattling noise, this sound doesn't usually signify a major problem. Pipes rattle because they're loose, and when water travels through them, it causes them to shake. Since the pipes are free-floating, they hit nearby walls and studs as they shake.
Excessive or irregular water sounds may indicate potential issues within your plumbing system. Gurgling, hissing, or constant water flow noises when no fixtures are in use could be a sign of a leak, water pressure problems, or issues with the water supply line.
A water hammer arrestor costs from $15 to $50. They're available online, at home centers, and in hardware stores. Most of the cost of a water hammer arrestor installation is in the labor. Calling in a pro will typically run $250 – $500.
If you are ready to soundproof your water pipes, you have two main options. You can either wrap the pipes with noise blocking materials or fill the cavities around the pipes with sound absorption products. Using both noise blocking and sound absorption materials can eliminate the sounds of pipes in your home.
Start by using a plunger to try and clear any basic blockages. This can often solve simple clogs. If that doesn't work, the next step is to check the P-trap under the sink. Cleaning out the P-trap can often remove debris that causes clogging.
If you hear a noise like banging, clanging, knocking, or vibration, or some combination of sounds, you're probably hearing hydraulic shock, aka water hammer. Water hammer occurs when pressure changes rapidly inside a pipe, causing the water to literally “hammer” into the pipe wall and make a noise.
Average Flat Rate
Some plumbing jobs are billed at a flat rate. As of 2025, the average plumber rates for larger repairs are typically between $500 to $800, while smaller jobs like repairing toilets, sinks, faucets, or bathtubs typically range from $125 to $350.
Your pipes are at risk of freezing any time temperatures drop below 32°F. However, it's much more common for pipes to freeze when temperatures dip below 20°F.
No, a sound is of course not dangerous—but what it represents can definitely have a heavy negative influence on your pipes. The effect of the shockwaves can damage the pipes and knock them loose, and also damage taps, faucets, and appliances. Enough force from water hammer can even cause pipes to burst.
You can fix the problem by tightening the screws holding loose pipe straps. Additional straps can be added to improve stability. Pipe straps are usually made of thin metal or plastic, while padded types are available to reduce vibration.
Water hammer rarely goes away on its own; it's a serious plumbing problem you should address. Pipes can sustain damage from repeated impact, resulting in leaks or burst pipes. Fixtures like faucets and valves can also be affected by water hammer stress, leading to wear and tear or even failure over time.
Though it may seem wasteful, leave all of your taps on for at least ten minutes. If ten minutes have passed and your pipes are still making noise, keep them running until the sound goes away. Then, starting with the faucet furthest away from your supply valve, shut off your taps one by one.
Your water pressure is too high: A loud tuba-like sound can indicate that your water supply is putting a ton of pressure on your pipes. While this isn't usually a super serious problem in the short term, it can lead to water leaks, pipe damage, and, of course, wasted water if it's ignored.
The sound of running water with no apparent source can often be traced back to faulty plumbing. Start by examining all valves, faucets, and toilets for signs of damage or malfunctioning. Check each valve and connection point for any indications of corrosion or deterioration.
Fortunately, noisy pipes are not often cause for concern if dealt with properly. The issue usually lies with simple issues that you can either handle yourself, or that can be dealt with through a routine call-out.
If you're dealing with ongoing high water pressure, you should check on your regulator. You may be able to lower your water pressure by adjusting the regulator, or you might need to replace it with a new one.