Can a 33 inch sink fit in a 36 inch cabinet?

Author: Mr. Deven Schimmel  |  Last update: Monday, July 24, 2023

To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.

What size sink fits in a 36 cabinet?

In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.

Will a 32 inch sink fit in a 36 inch cabinet?

Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.

Will a 34 sink fit in a 36 cabinet?

The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.

Is a 33 inch sink too big?

The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.

Quick Tip Tuesday: The Best Kitchen Sinks for a 30" Sink Base Cabinet

What size sink will fit in my cabinet?

Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.

What is the most popular kitchen sink size?

The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length.

Can a sink be too small for a cabinet?

Kitchen Cabinet Kings

General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.

How much counter space do you need for a sink?

Sink Landing Counter Space

The landing space requirement at a main sink is 24″ on one side and 18″ on the other side. The countertop landing area beside the main sink helps with Clean-up duties. With the dishwasher typically places on one side of the main sink the 24″ landing counter is taken care of.

Should kitchen sink be big or small?

In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches. The other thing that you need to consider is the depth of the sink. Sinks can have a depth between 6 and 12 inches.

Why does cabinet size matter for sinks?

Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!

What is standard sink size?

Standard-sized kitchen sinks measure 22 inches by 30 inches.

While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely. This size range will cover most of the options you'll find when shopping.

Why is there a minimum cabinet size for sinks?

The reason for this is to allow for adequate room to work when installing the sink, as well as to avoid potential water damage or mold growth in the cabinetry. The minimum cabinet size needed for your sink will be found on the product page from our website once you search the model like the example shown below.

Is 36 inch vanity too small?

The standard vanity size for single vanities is between 36 and 48 inches wide, making them a fantastic option for guest bathrooms and powder rooms. When you have an especially small bathroom design, there are even wall-mounted vanities designed to free up valuable floor space.

How do you measure a cabinet for a new sink?

Start by measuring the depth of your cabinet. Place your tape measure along the bottom of the cabinet and measure from the back to the front edge. Next, measure the total width. Place your tape measure along the bottom of the cabinet to measure from the left edge to the right edge.

Will a 36 sink fit in a 36 cabinet?

A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.

Can you put a 33 inch sink in a 33 inch cabinet?

A 33" sink will undermount into a 33" cabinet if you strap or harness, not clip or block, the sink in place. Disregard the sink manufacturer's instructions please; I've done this hundreds of times.It is not a difficult process at all.

Will a 30 inch sink fit in a 33 inch cabinet?

You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.

Can you put a 30 inch farmhouse sink in a 36 inch cabinet?

The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.

How much clearance does a kitchen sink need?

As a general rule of thumb, you will want at least a 1/2" of clearance on both sides between the lip of the sink and the inside walls of the cabinet (1/4" is tight, but doable!).

Is 27 too small for a kitchen sink?

Standard Kitchen Sink Sizes to Know

On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens.

Which shape of kitchen sink is best?

Kitchen Design

Rectangular sinks with sharper edges contribute to a minimalist or modern kitchen design. Rounded edges are better for traditional kitchens. If your kitchen has a trendy style, opt for D-shaped sinks, which offer more space than similarly sized rectangular sinks.

Is a bigger sink better?

If you frequently use large pans or baking trays, it might be worth getting a sink with an extra wide or extra deep bowl – or even a 1½ / double bowl. If you don't have a dishwasher in your kitchen, make sure you get a sink with a built-in drainer, so you have enough space to let items dry after you hand wash them.

What is the size of a small sink in inches?

The size of a typical kitchen sink is 22 x 30 inches. While bigger units are longer than 60 inches, a tiny sink is eight inches wide. The amount of cupboard space you have in your kitchen's overall size and the use your sink will serve will determine the appropriate sink size for you.

Previous article
Does paint protect wood from water?
Next article
How do I keep my toilet white without bleach?