Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
If you want to use baking soda on natural stones, there are some ways to do so. If you are face with a very difficult oil stain that you cannot remove on the stone than baking soda may be one of the few options you have. The first thing you need to do is to change the alkaline level of baking soda.
'Never clean marble countertops with baking soda. This could damage or wear down the sealant over time, causing it to lose its shiny sheen,' the expert says. 'Additionally, since natural stone such as marble, quartz, or any other type is an expensive material, any damage may be expensive to restore. '
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
Do Not Use On Granite or Marble. If you have soft surface countertops like granite or marble, step away from the magic eraser. You can use them on laminate, Corian, quartz, and other solid surface countertops, but do a spot check.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects. It can even lead to burning or etching to occur on the surface of the stone.
Wash the area several times with mild soap and warm water. If the stain persists, use a small amount of hydrogen peroxide diluted in warm water to gently wash the area. This should remove the worst of the discoloration. If all else fails, get in touch with your countertop contractor for help.
Next, mix equal parts bleach and water in a bucket. Once the bleach has been diluted, pour it onto your slabs and leave it to sit for 15-30 minutes. You can then start to brush the surface or, use a power washer to ensure there is no bleach residue left over that could stain the paving.
On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone. Small amounts can be removed with lacquer thinner or scraped off carefully with a razor blade.
Clean stone surfaces with a few drops of neutral cleaner, stone soap (specific products from Lithofin for example), or a dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks.
Countertops. If you want to keep your stone countertops looking beautiful, don't reach for vinegar. The acid etches and dulls natural stone such as marble and limestone. It can slowly dissolve them, according to Beckman.
The simplest answer is no, it is best to avoid bleach when cleaning any type of natural stone. Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time. Basically, the harsher the cleaner, the quicker it will break down the sealant.
Rubbing alcohol is a natural bactericide and can also kill fungus and viruses. It has no ill effects on your granite or the seal on your granite so it's an ideal way to keep countertops clean.
Maintenance and Cleaning of Natural Stone Surfaces
Never use abrasive cleansers, “soft scrub” products, or harsh/acidic chemicals on any stone as these can scratch or dull the polished finish. This includes substances like ammonia or many common liquid cleaners, such as Windex.
Disinfecting wipes are convenient and they are effective but you should avoid using them on granite or any other natural stone surface.
The multi-purpose cleaner contains bleach, which is extremely harmful for granite and many other natural stones. The wipes are also a cleaner you should stay away from, as they contain citric acid that can cause your sealant to wear down.
The best alternative, when you need to disinfect natural stone countertops, is rubbing alcohol with 70% or higher alcohol content. Alcohol is relatively neutral in pH, so it won't etch marble or softer granites.
Simply sprinkle baking soda onto a wet stain, leave it overnight and you'll be surprised by the results. Not only will the stain likely be gone, but so too will any related odors – no need for an additional paste. As long as you cover the entire area of the stain with baking soda, it should do the trick!