You may also end up finding a metal box you need to pull open to access the cleanout. Remember that the most common locations for the cleanout are along the main sewer or septic line and near bathrooms. It is typically near your home's foundation. As long as you search those areas, you can find the hidden pipe.
There shall be a cleanout near the junction of a building drain and building sewer either inside or outside the building wall. Cleanouts shall be placed in the building sanitary sewer and the building storm sewer at the property line and brought to the surface.
The cleanout is located after where the drainage lines meet the main sewer line. It is usually in the form of a T- or Y-shaped pipe fitting, topped by a threaded plug and square nut possibly covered by a plastic cap.
If you can't find the main sewer line in your house, chances are it is in your yard. Sewer line access points outside of the home can typically be located at the foundation of the house or near the street where the sewer line joins up with the municipal sewer main.
Many homes have two clean-outs (see below). One is near the foundation of the house and the second is at or near the property line. First, check the clean-out next to the house to see if it has water in it. If it doesn't contain any water, then you know the blockage is somewhere in the house plumbing.
If your main sewer line is clogged and you don't have a cleanout, you may be able to clear the blockage using a plunger or a plumber's snake. You have a few options to try before calling a professional.
Sewer cleanouts are typically 6 inches to 3 feet deep.
You can usually find it in your yard, often positioned vertically and protruding slightly from the ground a few feet away from the foundation. You can also check your basement or crawl space if the cleanout pipe isn't visible in the yard.
Residential sewer line pipe depths range from as shallow as 18 to 30 inches in depth or 5 to 6 feet deep. However, in colder climates where freezes occur, you often see sewer line depths ranging from 4 to 8 feet deep. This ensures the pipes are below the freeze line.
You will likely pay around $350 to $650 to have a plumber unclog a main sewer line unless you have complications like serious damage to the line.
A drain cleanout pipe is typically white or black and looks 3, 4, or 6 inches in diameter. Most caps are made of ABS plastic, though about 76 million homes in America still have cast iron sewage lines made with brass, cast iron, or copper plugs. Only plumbing professionals should use the drain cleanout.
On average sewer cleanout installation cost runs between $1,850- 3,500. This cost depends on several factors such as depths, or whether or not landscape or concrete will be removed, to create a proper workspace to access the sewer line.
Drain cleanouts are access points located throughout a home's drain line, usually near the basement wall. Each drain in the house typically has at least one drain cleanout, from which debris and clogged material can be removed.
Dual cleanouts provide redundancy in case of blockages or accessibility issues. Two cleanouts allow for easier access to the sewer line from different directions. They facilitate simultaneous cleaning or inspection of different sections of the sewer line.
Sewer lines come in a variety of depths. They can range in depth from 12″ to 30″ and can be as deep as 6+ ft. Often, it's only a matter of the environment and climate.
The septic tank is often buried about six feet deep and ten feet away from the building.
A lot of people think they don't have sewer cleanouts. But as I said, pretty much all homes do these days. It's more likely that your sewer cleanout is buried, often in a flower bed area. People cover up the cleanout because they think it's an eyesore.
An obvious sign of a sewer issue is if you see sewage pooling in your yard. A lingering foul smell and puddles that don't dry up indicate you might have a cracked main sewer line. Pest Invasion. A damaged sewer line can also invite unwanted pests into your home.
Not in most homes. Ordinarily, you have one sewer line that is intended to primarily carry what's known as “black” water; water from the toilets into either the city sanitary sewer system or into your own septic tank.
The code also states that you need additional cleanouts inside your home at every junction where the drainage line changes direction by 45 degrees or more. Your sinks, showers and most other drains also have their own smaller cleanouts located in the P-trap.
For instance, residential sewer line depth ranges from 18 to 30 inches. However, city sewer line depths are different. Your city's sewer lines must always be deeper than the deepest residential pipe to allow waste to flow downhill. As such, these lines can go as deep as needed.
Your home's sewer cleanout is a crucial part of your plumbing system. You'll usually find it outside, about 1 to 3 feet from where your house meets the ground. Look for a pipe sticking up with a cap on top that might have a square knob or notch for turning.