If you're not sure how high to go, a good rule of thumb is to go two to three inches above your window frame. Once you know how high you want your blinds to be, measure from that point down to the bottom edge of your windowsill. Round to the nearest 1/8-inch and this will be your ordering width.
The actual width of the 35" blinds are 34.5" (half inch narrower) to comfortably fit inside a 35" opening. So if your frame is exactly 34.5 inches, I would go with the 35" blinds. But first check that the width is the same through the whole length of the frame.
For optimum light control, the blinds should overlap the window opening by at least 2 inches on each side for a total of 4 inches added to the entire width.
Blinds.com recommends at least 1.5" of overlap on each side of the window for blinds and shades, and 2" of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Add an overlap of 3” on each side of the window (6” total) to allow for more privacy and light blockage. Please note: Factory Deductions: Inside mounted products have a light gap between 1/8” and 1/4” on either side of the window – this gap is required in order for the product to operate properly.
If your window depth is larger than ¾”, your blinds will not be flush but can still be installed inside the window frame. If your shallow window depth is less than this, your blinds will have to be mounted outside the window frame in order to secure the brackets.
Measure from the edge of the rubber beading, where it meets the glass and ensure you have at least 2.5cm clearance from any obstruction, such as handles, hinges or vents.
Standard Installation Gap
When windows are being installed, the crew will usually leave a small gap between the window frame and the rough opening in the wall on purpose. This gap is usually about 1/4 to 1/2 inch (that's around 6 to 12 mm).
Blinds are supposed to fit the window exactly if hung inside of the recess – so you would measure up the inside of the recess and order a blind that will cover the entire window side to side with the smallest possible gap at the edges – we will make 1cm or so allowance (depending on the type of blind), to ensure that ...
Our associates can cut your in-store bought blinds to the exact size needed, for free.
Measure the window in three places (top, middle, bottom), as shown in our measuring instructions. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4" to the width of each blind. (The factory will deduct 1/2" from each blind.)
The most common blind slat sizes are 2 inch slat blinds and 3 inch slat blinds. Wider slats mean that there's lesser space in-between each slat, giving your blinds a denser look.
Privacy: Blinds that touch the sill can improve privacy, especially in spaces like bathrooms or ground-floor rooms. Day and Night Blinds and Roman Blinds benefit from this setup as they prevent gaps through which people can see. Temperature Control: In colder months, blinds that touch the sill can help retain heat.
Homes: In residential homes, standard window sizes typically range from 24 inches to 48 inches in width and 36 inches to 72 inches in height. However, the most common window size for homes is often 24 inches wide by 36 inches tall (2 feet by 3 feet).
Measuring for PerfectFIT Blinds. Simply measure the visible glass area of each window or door. Remember to use a metal tape measure, as cloth or plastic ones can stretch and give an inaccurate measurement. Only measure up to the edge of the rubber bead, don't include it in your measurement.
Fitting blinds inside the recess
It should be noted that this method isn't always available as, generally, a recess depth of 7.5cm is needed to ensure there is enough room for the blind. To measure for a blind inside the recess, you need to measure the width and height within the recessed space which the window fills.
You need to make sure your window is suitable for a Perfect Fit blind. Ensure your window has a rubber beading between the window frame and the glass. If your window doesn't have a rubber beading, they are not suitable for Perfect Fit. Your window frame must have at least 3cm clear around all edges for your frame.
Inside mounts are the most popular choice. They offer a clean, finished look because the blinds or shades are recessed and contained inside the window casing. Inside-mounted window treatments are NOT the best choice for you if: Your window frame is not deep.
Aid in Better Sleep
This is especially important for light-sensitive sleepers or those living in well-lit areas. Closing your blinds ensures that your bedroom remains a sleep-friendly sanctuary, promoting healthier, more restorative rest.
Measure the exact width (left to right) of the window frame or how wide you would like the blind to be. Be sure to measure wide enough to cover the entire window and provide maximum light coverage. Example: If the window opening is 36” wide, it might be helpful to order 40” if the space allows.
Custom blinds can be expensive and inconvenient especially when you factor in the turnaround processing time. The Home Depot has blind cutting machines in their local stores so that you can buy great quality cut to width blinds the same day.
Keep in mind that 100 big blinds is a pretty standard buy-in for all cash games, no matter what the blind levels. Manysolid poker players buy in for 100 big blinds, no matter what the maximum buy-in. The Lodge features some of the deepest available buy-ins for cash games of any poker room in the U.S.