One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
A magnet cannot entirely unlock a deadbolt.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
You can pick any keyed deadbolt lock with two basic tools. The first is the pick itself, which is a long, rigid piece of metal or plastic that fits easily into the keyhole and won't bend easily when you push it against something.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Any non-magnetic material can be used to defeat a maglock, such as clear plastic, provided it is easy to over look. Clearly, red electricians tape might not go unnoticed for very long. Aluminum tape of the type used for EMI shielding would also work quite well provided adequate thickness is achieved.
Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.
One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.
To open a door with a credit card, start by sliding the card in the gap between the doorknob and the frame. Then, bend the card toward the doorknob. Next, bend the end of the card back toward the frame, which will cause the card to slip under the latch and unlock the door.
Insert a pair of scissors into the hole of the lock as deeply as you can. The blades should be thin enough to fit into the whole of the lock. ... Turn the scissors counter clock wise, from left to right, once the scissors are deeply inserted into the lock. Shift and move the scissors around until the lock is opened.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.
It's quite easy to pick a deadbolt lock. In fact, you would want to replace all your key locks with electronic ones when you discover how simple it is. This doesn't mean that picking a deadbolt lock does not require skills or practice – it still does – but the technique is so easy that anybody can learn it.
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.