Vinegar and Olive Oil Solution: Vinegar and olive oil are wood-safe ingredients that can help boost shine and eliminate dirt or grime. Dish Soap and Water: You can dilute the soap with water to create a sprayable mixture that helps cut grease effectively.
Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth. Add a few drops of liquid dishwashing detergent to the vinegar and water solution to clean extremely grimy cabinets.
You need to use Dawn dish soap. (The other dish soaps don't cut the grease) Or, I have also used pine sol in the past. You simply scrub down the cabinets and let them dry. If you have a really tough area, you could use a little bit of vinegar, baking soda, and a toothbrush. I hope that this answers your question.
Some of the benefits and uses of Murphy's Oil Soap are: It smells fresh; it cleans without leaving a soapy residue as long as you do not use too much; cuts through grease that you may encounter on cabinets and paneling; great in luke warm water for wood floors (not laminate). I love, love, love Murphy's Oil Soap.
Mix 1 Tablespoon of dish soap with 1 quart of warm water. Soak a clean washcloth in the water for 3-5 minutes and wring it out. Then use the damp wash cloth to wipe down your cabinets. Wipe down both the front and back of the cabinet doors. Pay careful attention to handles and hinges.
Avoid Using Vinegar or Baking Soda
White vinegar is effective at cleaning soap build-up and mineral deposits, which are highly unlikely to be a problem in kitchen cabinets. But white vinegar and baking soda are abrasive and are more likely to do more harm than good.
Whether your cabinets need a quick wipe down or a full-on deep cleaning session, some of the best cleaning supplies are already in your kitchen! Simple solutions of dish soap and water can do wonders for cleaning away grease, splatters, and food messes. Dawn® Platinum makes cleaning kitchen cabinets So Dawn Easy!
For Water Based Finishes
Cleaners such as Pledge and Murphy's Oil Soap are not recommended because they leave a dull residue on the finish. Water based surfaces may be cleaned with a damp cloth or General Finishes Orange Oil.
The Best Options for Cleaning Wood Cabinets
Dish soap is easily the best cabinet degreaser for your kitchen. Most of the build-up on your cabinet doors is grease from cooking or food preparation, and dish soap is specially designed to remove grease from your dishes.
-Liquid Gold can be used on natural wood furniture, kitchen cabinets, paneling, doors and decorative trim, almost anything made of wood! -Liquid Gold covers nicks, scratches and water damage on wood surfaces.
Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle.
Safe Cleaning
It's important to dilute these substances properly. Too much vinegar can potentially dull the wood finish over time due to its acidity, while too much Dawn can leave a slippery residue. The ideal mixture typically involves a mild solution of diluted vinegar with just a few drops of Dawn.
Did you know you can use Pine-Sol as a cabinet cleaner? Learn how to use it to clean kitchen cabinets and remove grease and grime.
You can make an easy, affordable cleaner by mixing water and baking soda in the ratio of 1:2. The product is very effective in removing spots. Spread a little amount of the paste on the stain. Allow a few minutes for the paste to sink into the stain before wiping the area off.
Mix equal parts water and vinegar in a spray bottle, apply it to the cabinets and wait a few minutes before wiping it off with a damp cloth. This method is excellent for removing tough residue without resorting to harsh chemicals.
Wipe the cabinets clean with a soft, damp cloth and dry immediately with another clean, soft cloth. Always wipe in the direction of the wood grain. Apply a thin coat of high-quality polish. Choose a polish that does not contain silicone or wax, and follow the manufacturer's directions for application.
Hardwood Floors, Wood Furniture, and Other Wood Surfaces: Due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
The reason is because it may leave a slight film when it is not diluted. Please know that I have, on occasion, used it straight in order to remove stains from my wood. 99% of the time, I dilute it, though. I hope that this answers your inquiry satisfactorily.
The best way to avoid cloudy and/or damaged areas on your wooden cabinetry and furniture is to avoid using Pledge and like products altogether.
You can use Pine-Sol® on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.
The best cleaning solutions for wood cabinets
Dish soap: Designed to cut through grease, dish soap is an alkaline (non-acidic) solution that can be mixed with hot water to remove grease and dust from your cabinets. Baking soda: A paste of warm water and baking soda can loosen caked-on food and drips.
The highest strength industrial degreaser available, Solvalene was created for the toughest degreasing applications. This alkaline fortified, water based degreaser is extremely versatile and can handle most heavy duty cleaning assignments.
Wood Cleaner N100 and Concentrated Wood Cleaner N140 are products that can be used both indoors and outdoors. These products effectively clean and dissolve dirt, stains, grease and oiled finishes on wood. They are also widely used for the renovation of terraces, slabs and other blackened or darkened outdoor floors.