Remove mineral buildup from inside the tank. Adding a toilet bowl cleaner or white vinegar into a dry tank will help to remove the minerals. Then regularly use a cleaning bowl tablet that can be hanged along the inside of the tank to continuously reduce deposits.
Heat a gallon of water on the stove, and squirt about one-half cup of dish soap in the toilet. The water should be hot but not boiling. Pour it into the toilet. Wait at least 15 minutes before flushing.
Vinegar and Baking Soda: - Pour about 2 cups of white vinegar into the toilet bowl. - Add 1 cup of baking soda. - Let the mixture sit for about 30 minutes to an hour, then scrub with a toilet brush and flush. Commercial Limescale Remover: - Use a product specifically designed to remove limescale.
Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
Black particles in the toilet bowl water
The black particles are likely the result of the disintegration of the float in the toilet tank. The float is especially likely to break down over time if you use an automatic toilet bowl cleaner in the tank. Replace the float or call a plumber about replacing the float.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
There is only one Drano® product recommended for use in slow-running toilets: Drano® Max Build-Up Remover. It contains microorganisms that break down organic matter in pipes that can slow water flow.
Causes for a Gurgling Toilet
Toilets can gurgle or bubble when there is negative air pressure in the drain pipes. The negative air pressure can create an air vacuum or air block. When you flush the toilet, this air has to go somewhere, so it comes up the drain pipe and is released in the toilet.
Clorox® Toilet Bowl Cleaner – Lime & Rust Destroyer is your go-to. The thick formula clings to the surface to dissolve hard water stains and destroy mineral deposits, rust and lime scale.
Overall, vinegar is the best solution to mineral buildup. Cleaning certain fixtures in your home is a do-it-yourself (DIY) afternoon project with a big payoff. An overnight soak in vinegar could be the answer to your low flow problems.
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
Vinegar and Borax
Borax is a great cleaning product that, when combined with vinegar, can successfully eliminate hard water and mineral deposits. You can use this combination in your toilet and most other plumbing fixtures, too.
These growths are known as biofilms or 'microbial slime' and are most noticeable in bathrooms and kitchens. If not dealt with at their onset some biofilms can grow into certain materials and become a permanent feature. What are biofilms? Biofilms contain bacteria and fungi that have grown and multiplied on a surface.
Urine stains and limescale in toilets: How deposits form
Urine scale is a mineral compound created by chemical processes: The calcium in the toilet water reacts with substances in the urine. A high pH value means that urine scale is as hard as mineral stone.
More frequent trips to the toilet for folks with sugar-rich urine can spell trouble when it comes to persistent mold rings. While the extra toilet cleaning is a hassle, it can actually be a blessing in disguise if it helps you catch a diabetes warning sign early on.
Common culprits include iron and manganese. When the water enters your toilet tank and sits for some time, these minerals can precipitate and form deposits, resulting in a brown tint. Higher amounts not only make your water taste metallic but also leave a brown sticky slime inside the toilet bowl and tank.