As mentioned above, you could probably swim in a pool without chlorine without any major health issues. However, long-term use of a pool lacking chlorinated H2O could make you sick or, at the very least, contribute to rashes and other types of skin irritation.
Regardless of how frequently or what system you use to add chlorine to the water, the chlorine level should stay between 1.0 and 3.0 parts per million (ppm) to maintain a healthy pool. Anything higher will make you to run the risk of red eyes and swimmers itch.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Even from a health standpoint, it is simply not safe to operate a pool without some added “chemicals” to combat bacteria and contaminants in the water. A pool without chemicals is the perfect breeding ground for bacteria, viruses, and parasites.
When chlorine levels are too high, sweat, skin, and other organic compounds can react with chlorine, producing harmful fumes that cause irritation to the eyes, skin, and respiratory system. However, these findings may show the effects of over-chlorination, but do not suggest that a low level of chlorine is harmful.
While the quart or so of water that was setting in the hose may have some chemical contaminants in it, by the time that is diluted into thousands of gallons of water, it's of no concern. That is of course assuming that your swimming pool is not your primary source of all drinking water.
You might have an infestation of algae, fungus or bacteria that can deplete normal chlorine levels and it is possible for this to occur without many visible signs. Your pool may appear to have a dusty look on the pool bottom. If you brush it and it clouds the water, then it is most likely a Mustard Algae.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine.
Raising pool chlorine can be much easier than trying to lower chlorine levels. Simply adding chlorine in the form of chlorine tablets, granular chlorine, liquid shock or powder shock will increase the total amount of chlorine within the pool.
Maintenance is critical when it comes to the quality of your pool water. Well maintained pool water can last up to 5, maybe even seven years before you need to replace it. This means weekly cleaning, functional filters, and checking ph levels every day. Usage is a huge determining factor.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
It takes a lot of chemicals to make pool water safe for swimming. Untreated water can accumulate harmful Escherichia coli and Salmonella bacteria and protozoans such as Cryptosporidium parvum and Giardia lamblia.
What chlorine level is too high to swim? It depends on who you ask, but the acceptable range is between 1 to 5 ppm. (So, for example, 10 ppm chlorine is not safe to swim in — that's too high.)
Strong Smell of Chlorine
A healthy, safe pool will have little to no odor. That smell comes when your pool is out of balance. The smell of chlorine arises when the chemicals are dealing with a lot organic material like sweat, urine, and bacteria in your pool.
As chlorine does its job, it is depleted in the process. To prevent the demand for chlorine from happening, help remove the organic material from your pool water by brushing the algae from the pool walls, cleaning your filter, and removing leaves and debris from the water.
"Shocking” refers to the process of adding chlorine or non-chlorine pool chemicals to the water in order to raise the "free chlorine” level. The goal is to raise this level to a point where contaminants such as algae, chloramines and bacteria are destroyed.
The goal of shocking your pool is to raise the free chlorine level of your pool water to roughly 10 times the combined chlorine level of your pool water.
Open your pool under normal procedures, and let the filter run with its normal amount of chemicals. When all the other chemicals, such as chlorine. pH and alkalinity, are balanced, add the chlorine stabilizer. Add the stabilizer only after the filter has been backwashed to ensure it is cycled through a clean filter.
Pros of Saltwater Pools
There's less chlorine and less of the heavy chemical scent and content. They're gentler on the skin, with less irritation to the eyes, hair and swimsuits. The water has a softer, silkier feel to it compared to chlorine water. They have lower maintenance costs than chlorine pools.
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
Mineral Swim is the only system of it's kind combining Australian made ozone water purification technology with 100% natural Dead Sea minerals to make it the safest, healthiest swimming pool about.
Water trucks can fill a pool much faster than a standard hose. A 25,000-gallon pool will take from 42 to 84 hours to fill using a garden hose, based on normal water delivery.
Tap water can present risks.
Most people fill their kiddie pool with hose water, which doesn't usually have enough (or any) disinfectant in it to kill germs. Since it's not recommended to use chlorine in kiddie pools, there can be an increased risk of kids catching a recreational water illness.
1. Have the water trucked in. It fills up the pool quicker and costs the same amount if using your hose. When you use your hose you have to pay sewer fees.
The ideal level of free chlorine in the swimming pool is 2 to 4 ppm. 1 to 5 ppm is acceptable and 9 ppm is on the high side. 9 ppm would likely be safe to swim, but could be more of an irritant. Ideally, the level would be alllowed to come down to 5 ppm before swimmers are allowed to swim.