Modular Casework doors with 270 degree hinged doors allow a full opening to access materials stored in overhead and bottom casework and millwork cabinets. Sometimes regular cabinet door hinges limit the ability to open up so materials and products can be stored and retrieved in a cabinet.
A parliament hinge is an “H” shaped hinge which is designed to allow doors to swing all the way open and lie flat when open.
Here are the standards sizes for overlay hinges for framed cabinets: 1.27 cm (1/2"), 3.17 cm (1-1/4"). * A standard overlay is 1.27 cm (1/2"), whereas framed full overlay is 3.17 cm (1-1/4"). Frameless cabinets, often called "full overlay" or "European style cabinets", generally have a thickness of 5/8" or 3/4".
Wide throw hinges are used when you need extra clearance behind a door – typically a door that opens 180 degrees.
The inset hinge, otherwise known as the full-crank, is a type of European hinge. It gets its name from the bend in its hinge arm—this hinge is offset from the edge of the door to give the cabinet a flush finish, making it ideal for inset cabinets.
Cranked hinges are used to allow for doors/windows to open at a wider angle than normal. Depending whether they are double, self-closing or standard they can allow wider opening gaps past 180 degrees. They are most commonly applied to cabinet doors.
Blum 100 Degree Hinge. These hinges allow the cabinet door to open 100 degrees enabling easy access to the stored contents within. Constructed from metal alloy finished with a durable nickel coating and compatible with all mounting plates in Blum's Clip Top range.
Cabinet hinges 45 degrees are designed for corner doors. Similar to cabinet hinges with opening angles of 30 degrees, in this case they are most often used for corner doors surrounded by other cabinet doors.
Continuous hinges are often used for heavy doors and lids that need extra support. These hinges are more stable than other types of hinges because they're secured along the entire length of the surface and the frame.
Full overlay hinges can be interior or exterior. They attach to doors where the end of the closed door fully covers the cabinet frame. Half overlay hinges are either completely interior or exterior. The closed door fully covers the cabinet frame with these hinges.
Full overlay hinges are used for individual cabinets or cabinets on either end of a row of cabinets. Half or Partial overlay hinges are used for a pair of cabinet doors in the middle of a row of cabinets where two doors have their hinges mounted on opposite sides of a shared middle partition.
Inset Hinges Have a Sleek Appearance:Inset hinges allow cupboard doors to be flush with the frame, which gives them a neat appearance. Inset Hinges May be Decorative: Inset hinges are available in a variety of designs along with a range of metals that easily complement any interior style.
A wide throw hinge sets the pivot point out away from the door allowing the door to open 180 degrees (depending on obstructions in the swing path of the door). Wide throw hinges can be used when a door is set in a wide door jamb.
General rules to follow with Door Hinges
The top hinge should be located 150mm from the top of the sash, the bottom hinge should be located 150mm from the bottom of the sash, and the middle flag hinge should be positioned at an equal distance centrally between the top and bottom of the sash.
Disadvantages of a Piano Hinge:
Potential of Degradation: Because piano hinges are metal-based, it is common for the door hinges to become contaminated with rust, leading to corrosion. This is most prominent when your piano door hinges are exposed to moisture that finds its ways to the door hinge leaves and knuckles.
Opening to 110°, this hinge gives you full access to the cabinet when the door is open, while ensuring a tight fit to the cabinet frame when the door is closed. Full overlay hinges are used by most kitchen manufacturers as they completely hide/conceal the cabinet that the doors are attached to.
This style of hinge is used for double door corner cabinets where the first door is attached the cabinet side panel with a 170° hinge and the second door is attached to the first door with a Bi-Fold hinge. It is the ideal solution for Kitchen corner cabinets fitted with Carousels.
These hinges are used on cabinets that house drawers. The ingeniously designed 155° Blum zero protrusion hinge ensures the door swings clear of the cabinet allowing the drawer to open unhindered.
noun. : an early American Colonial furniture hinge consisting of a pair of half-round iron wires doubled back like cotter pins, linked by the eyes, and clinched into the wood at the sharp outer ends.
This Titus clip on, 165 degree hinge is ideal for standard kitchen cabinet doors. For an added bonus these hinges are soft close, so you can say goodbye to slamming kitchen cabinet doors.
Any hinge has two degrees of freedom shear and moment. It can transfer shear and axial force from one section to another.
Ball Bearing Hinge
If we said that ball-bearing hinges are among the most durable on the market, we wouldn't be wrong. The primary purpose of this hinge type is to support doors that are heavy and wide. Just as we mentioned, you will typically find a ball bearing between the two separate knuckles.
Blumotion Hinges: Blumotion hinges incorporate a soft-closing mechanism that ensures doors close gently and silently. Blum soft closing hinges have an integrated dampening system that activates as the door nears the closed position, preventing slamming and reducing wear and tear.
Z Type Hinges are the most popular type of hinge and are widely used in designing various doors and windows in residential & commercial establishments.