Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
If you clean the toilet once a week with a toilet cleaner and a toilet brush, stubborn stains shouldn't even be a problem in the first place. A quick weekly run-through with Lysol disinfectant wipes on the exterior of the toilet should keep it sparkling.
You're actually better off not using bleach in a toilette bowl. Bleach is an alkali. Over time, it corrodes porcelain, leaving a rough surface that is even harder to clean, while providing an ideal environment for bacteria. For that reason, vinegar is probably a better choice.
Add Antifreeze
The solution is to use marine antifreeze which does not contain harmful chemicals or create the noxious fumes of regular antifreeze. Add a little to your toilet bowl, and an ounce or so to every drain, from the shower to your kitchen sink to prevent any remaining water from freezing.
Clean your toilet bowl using a combination of toilet cleaner and in-bowl products such as Lysol® Click Gel™. Don't skip cleaning the toilet seat and lid, a quick wipe with a disinfectant wipe should do the trick. Always close the toilet lid when you flush to help prevent the contamination of other bathroom surfaces.
After a routine cleaning, add a few ounces of liquid toilet cleaner or drop a dissolving tablet into the tank. The cleaner will run into the bowl with each flush, killing bacteria and eliminating residue. It will also help break down mineral deposits in the siphon jets.
Baking Soda and Vinegar
Baking soda is also a mild abrasive, so it will remove stains and grime from your toilet bowl. To clean your toilet, use one cup of baking soda with two cups of white vinegar. Brush it into the bowl, let it sit for five minutes, then flush again with the water on full force.
The 'fizzing' reaction of the baking soda combined with vinegar can also play a part. That fizzing may help to break down the clog into smaller particles, making them easier to flush!
Baking soda or sodium bicarbonate is another non-toxic alternative to bleach-based toilet cleaners. It is mildly abrasive and can remove stubborn stains, mineral deposits and grime from your toilet bowl. Baking soda can tackle grime, kill harmful germs like E. coli, and banish unpleasant odours.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
Knock out the dirtiest job first. Get at toilet bowl germs and grime with Original Pine-Sol® to disinfect while you clean the rest of the bathroom. Dirt, mildew, and soap scum like to linger behind after the suds rinse down the drain. Use Pine-Sol® on shower tiles, walls, fixtures, and even plastic shower curtains.
Mould and mildew also thrive in the high humidity around the toilet base and rim. Additionally, hard water can leave unsightly cloudy limescale deposits that make bowls look dirty faster. As urine dries within the toilet, its mineral salts crystallise, forming stubborn yellow stains that continue harbouring odours.
One of the most effective ways to keep your toilet bowl clean is by using a quality toilet cleaner. Fluidmaster's Flush 'n Sparkle™ cleaning system is a great option, as it provides a powerful cleaning solution with every flush.
The most efficient way to clean a toilet cistern is to use an antibacterial cleaner with enzymes, or you can use a household bleach solution (one part bleach to twenty parts water): Put on your rubber gloves. Turn the localised water supply to your toilet. Flush the toilet.
A lye-based drain cleaner, that's usually the most common kind. Many times straight chlorine bleach will work, but do not mix with anything else—-AT ALL!
It's essential to clean the inside of a toilet tank to remove mineral deposits that can damage or interfere with the toilet's operation. Baking soda will absorb odors, break down stains, and dislodge fungal growth with its abrasive power.
Vinegar and baking soda produce that oh-so-familiar chemical reaction that powers through buildup and loosens tough stains. While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl.
Vera Peterson, president of Molly Maid, recommends starting with vinegar to soak the tank. “First, remove the lid and take a peek inside,” she told Martha Stewart Living. “If you see any mineral buildup or crud, pour four cups of vinegar into the tank.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Step 4 Splash Pine-Sol® into the toilet bowl and hit every crevice with your trusty toilet brush. Let it sit for a few minutes and flush. TIP: Only have a few minutes to clean? Add a little of your favorite scented Pine-Sol® to the toilet bowl in the morning to keep your bathroom smelling fresh throughout the day.
Choose a toilet cleaner that is designed to break down stains and kill germs. If you prefer a natural option, white vinegar works just as well. Pour the cleaner or vinegar into a spray bottle and generously spray the inside of the toilet bowl, ensuring you cover the entire surface, including under the rim.
You can clean the toilet using this product by pouring a little into the bowl and scrubbing clean. But we don't recommend placing Fabuloso or any other all-purpose cleaner in the back of the toilet tank. Such cleaners can be corrosive and may degrade the rubber gasket and seal in your tank.