What does 84 panel mean for curtains?

Author: Archibald O'Keefe II  |  Last update: Wednesday, June 15, 2022

The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.

What does panel size mean for curtains?

Understand Measurements

Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don't buy your curtains just so they're big enough to cover a window.

Are 84 inch curtains long enough?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. "Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don't look right in most scenarios and end up being an awkward length," says Curtis.

What is a panel when buying curtains?

A panel is a length of fabric, hemmed at the bottom, that hangs in front of a window. It may be tab- or tie-topped; have grommets; be one of two panels that form a set of curtains that cover a window when pulled closed; or be a fixed, flat panel of cloth over the window.

How high do you hang 84 inch curtains?

When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.

Measuring Your Windows For Curtain Length & Width Made Simple

How high do you hang 84 inch curtains with grommets?

If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.

How much wider than window should curtain be?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

What does 84 inch panel mean?

The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.

Do you need 2 curtain panels per window?

As a general rule of thumb, curtains that are attractively full and drape gracefully around the window require two to two-and-a-half times as much fabric as the width of the window itself.

How do you measure curtain panels?

Measure the Width

If you want your curtains to close and cover the entire window: Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

Do 84 inch curtains touch the floor?

Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.

How long should curtains be for 8 ceilings?

For an 8-foot ceiling, your curtain panels should probably be about 91 inches long. If you don't want to get custom window panels, you can buy 96-inch ones and hem them so they are floor to (almost) ceiling.

How do I know what size curtains to buy?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.

How many curtain panels do I need?

Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.

What is the standard width of a curtain panel?

It can vary from 50″ up to 58″, and some fabrics, especially sheers, can some in double width at 108″ wide. But the standard in the U.S. is 54″.

What size curtains should I get for 9 ft ceilings?

In Closing. For a 9-foot ceiling, 96-inch curtain panels are typically a good fit. This allows you to hang curtains that reach the floor, with the rod placed one foot from the ceiling. If you prefer curtains that pool on the floor or curtains that hang higher, just pick the next size up.

What does 1 panel of curtains mean?

Types. Single Panel Curtain:As the name states, single panel curtains are made of one piece of fabric. These are great for sliding glass doors. Shop Single Panel Curtains and Drapes. Panel Pair: These curtains come in matching pairs, allowing you to hang the two pieces of fabric on either side of the window.

Can you put just one curtain panel on a window?

Yes, you can use just one curtain panel. This is sometimes called single panel curtains. Individual panel curtains work exceptionally well for sliding doors or smaller windows. Most people consider two curtain panels to have a "fuller" or a more finished look, but using a single panel gives a room a unique feel.

What are two panel curtains?

  • Typically someone would want a panel on both sides of their window. ...
  • It means there's only one side! ...
  • One panel meaning one curtain. ...
  • It means only one curtain. ...
  • There is only 1 curtain in the package. ...
  • There are two panels shown in the product photo. ...
  • It come with only one single curtain.

Should I get 63 or 84 inch curtains?

This will ultimately depend on the length of your window, but as a general rule, curtains will hang to the following points on most windows: 63 inches: To the windowsill. 84 inches: To the floor.

How do I measure curtain width?

For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you'll be hooking your curtains into).

What size curtains do I need for a 72 inch window?

To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)

What size curtains do I need for a 60 inch window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

Is it OK if my curtains don't touch the floor?

The answer to this question is important because it can affect the way we do our decorations. Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy.

Why are grommet curtains so popular?

Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets come in a variety of sizes and colors so they are easily worked into any decor.

Previous article
How do you paint high gloss surfaces?
Next article
Does covering a pool prevent algae?