Wood planks on ceilings have various names, some common names are tongue and groove, beadboard, and shiplap.
If they're structural supports, they're either joists or rafters; joists are horizontal, running across a ceiling to help hold it up, while rafters are sloped to run along the pitch of the roof. But if the ceiling beams you're looking at are decorative instead of structural, they're simply called wooden beams.
Drywall: A paper-covered panel with a gypsum core used as the interior wall and ceiling facing in most homes.
Ceiling moulding, also known as crown moulding or cornice, runs along the top of a room where the wall meets the ceiling. It softens the transition from wall to ceiling. Crown moulding can be simple or intricately detailed. These types of moulding trim can make a room look polished.
Joist, Ceiling. The timber used in the roof structure to support the ceiling battens and ceiling only. Ceiling joist do not carry any weight from the roof. Joist, Floor. The horizontal timber members used for supporting flooring or decking and in turn supported by the bearer(s).
What are the wood planks on the ceiling called? Wood planks on ceilings have various names, some common names are tongue and groove, beadboard, and shiplap. Armstrong products are named COUNTRY CLASSIC Planks, EASY ELEGANCE Planks, and WOODHAVEN.
Ceiling joists
These boards are generally 2”x6” boards, up to 2”x12” and are located directly above the drywall ceiling. They will run across the ceiling of each room and be supported on each end by a wall. They are stood up on their thin edge and will usually have some sort of insulation between them.
Ceiling Skirting Is Called Coving / Cornice.
The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
A cornice is an ornamental box typically made of wood with fabric attached to the frame that's installed at the top of your drapery, shades or blinds.
Coving. Also known as “coves”, ceiling coving is a simpler, more uniform version of cornicing. Both are designed to add a decorative touch to the walls and ceilings of an interior location, but the aesthetic difference will help to inform you of which you are looking at.
Ceiling panels can go by a lot of names, including: Ceiling tiles. Drop ceiling tiles. Suspended ceiling panels.
Ceiling joists are horizontal structural elements that span across a room, running parallel to the floor and the roof. They are typically made of wood, though steel or engineered wood can also be used in some cases.
Gypsum Ceiling Board
Generally, gypsum board is made of compressed gypsum powder covered by card board. Standard sizes are 0.6 x 0.6 m. and 0.6 x 1.2 m. Thickness available is 8, 9, 12 and 16 mm.
"The color from wood can help lighten up a room with a relaxing softness that isn't given by a painted ceiling," Dallas explains. Additionally, she adds, wood ceilings offer insulating properties and sound proofing, plus, they require little maintenance over time.
Ceiling decorations are often called ceiling tiles, ceiling panels, or ceiling coverings. They are used to improve the appearance and insulation of a ceiling. Ceiling decorations can be made from various materials, including metal, fiberglass, plastic, or wood.
Rafters are put from one end of the roof to the other and will act as a support system for all the other components. The outer rafters at the extreme ends of a roof are called "common rafters" while the ones between those are called "roof rafters".
So what exactly are fascias & soffits? They are both parts of the exterior trim of a property, along with doors, windows and gutters. The fascia, often known as a fascia board, is a long piece of material, most commonly wooden, that runs underneath the roofline.
Roof sheathing (also called roof decking) is the wooden boards that make up the framing of a roof system. These boards are what your shingles and other roofing components are installed directly on. There are two types of roof sheathing, plank and sheet.
They are called baseboards by Americans; others refer to them as kickboards or mouldings. In the bygone days they were called “mop boards” because they allowed homeowners to mop the floors without soaking the wall plasterboard. Here in UK they are known as skirting boards.
That is called ceiling texture. Some of them have little bits of paper mixed with drywall compound or gypsum. Some have plaster of Paris or bits of Styrofoam. Some are sprayed thin. Others are sprayed thick and called a popcorn ceiling.
A ceiling cornice is typically a moulding that can be decorative or plain. It serves an aesthetic as well as a functional purpose in both residential and commercial buildings. It is typically a moulding that comes in uniform pieces that can be laid side by side on the joints of walls and ceilings.
Fascia: The fascia are boards attached to the edges of the roof. The boards run horizontally and support gutters and drainage pipes. Decorative boards beautify the appearance of the house. Keeping gutters clean preserves the integrity of the fascia and soffits.
Crown molding is literally what you think—an overhead crowning touch that flares out in the space where the walls and ceiling meet. Also known as cornice molding, it may be elaborate, with decorative cutouts, or simple and linear (Shaker) in design.
Roof decking, or sheathing, is the strong layer of wood that is laid on top of the rafters and becomes the base layer for any roof covering. Decks are most often made of plywood sheets or stand board (OSB).