A professional driveway cleaning company will always insist on re-sanding any block paving drive that they work on, and for very good reason. It is a critical component of the process, and failure to re-sand will cause structural problems in the future.
Sometimes, after pressure cleaning, sand is blasted out of place. Re-sanding is recommended where necessary. Most people think that the sand needs to come all the way to the surface. The sand secures the pavers together and does not need to be seen to do its job.
Should you re-sand brick paver joints? Brick pavers absolutely, 100% need to be re-sanded prior to sealing. The sand in the brick paver joints serves MANY integral purposes.
When the deck is dry (36-48 hours after washing, depending upon humidity and weather conditions), it's time to sand the surface. You can use a pole sander with 80-grit sandpaper to remove all the loose wood fibers that were lifted by the pressure washing.
Once the patio surface has been cleaned and allowed time to dry, you fill the paver joints with the mix of Polymeric Sand, and apply a coating of water. Once the bond sets, it becomes very firm and locks between the paver joints while still retaining flexibility and providing a long lasting, durable jointing material.
Premium joint sand is the best choice with it comes to refilling and restoring your missing paver joint sand. Compared to polymeric sand, premium joint sand takes less absorption and drying time which makes the restoration process faster and more efficient.
Regular sand for paving is prone to erosion, damage from weeds and can make your pavers hard to wash without risking the loss of any jointing sand between the stones. Using polymeric sand, however, prevents weeds from taking root and holds pavers firmly in place thanks to the durability of its seal.
The process you decide to carry out first depends on the condition of the surface you're working with. If the material is strong, it's better to pressure wash first, as it's always easier to sand the wood after it gets dry.
Pour the sealer into a paint roller tin and use a long roller brush to apply the sealer onto the paver surface. Make sure you're working in sections that'll keep you from getting trapped in a corner. Follow the sealant instructions on how much drying time to allow after the first coat then apply the second coat.
Sand the entire deck to remove any old stain, paint, or varnish from the wood. After sanding, power-wash the deck and allow it to dry for at least 24 hours before staining. Sanding exposes porous wood that's ready to soak up the stain, but this isn't possible if the wood is full of water.
Pour the sand onto the pavers and sweep it into the joints. Using a broom handle or some other blunt object, tap on the pavers. This will cause the sand to consolidate. Sweep more sand into the joints until the sand is within 1/8” of the top of the paver.
Streaks & Lines – Pressuring washing improperly can leave unsightly streaks, swirls & lines all over your hardscape. Permanent Damage – Not using the right tips, holding the wand too close to the pavers and poor technique can result in permanent damage to the surface of the pavers.
Joint stabilization – If you don't have Sand in the joints, rainwater or pool water will run between the brick paver joints and wash out the base aggregate sand material your brick pavers float on (usually a 1″ – 2″ sand base), making your brick pavers lose, shaky, uneven, sunken in or even raised in some areas.
If the pavers are wet due to a pressure wash, allow them at least 24 hours to air dry. They may need a reseal after a deep clean, which is crucial to wash away residue. Excessive moisture from intense heat can also hinder the sealing process.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Power or pressure washing will clear out the weeds from a Cobblelock block paving driveway or path, so they are gone ... but only for for a short time. But although the surface looks good when we leave a customer's property, neither softwashing nor power or pressure washing actually kills the weeds.
You can use a pressure washer on your patio pavers if you want to clean stubborn stains or mildew from them. However, be very careful when doing this! Use a gentle spray and avoid letting the water run down the sides of your pavers, especially if they're set in the sand rather than mortar.
After pressure washing your fence, let it dry for at least 48 hours. You want to allow enough time for all of the absorbed water to evaporate from the wood so it doesn't get sealed in. Once your fence is fully dry, it's important to paint or seal it so that it doesn't become damaged by the sun and wind.
Best Time of Day to Power Wash
House washing can be performed at basically any time of the day, as long as you have sufficient light needed to safely complete the job. Extreme summer heat can make it difficult to properly wash your house, especially while working with certain chemicals.
Use Concrete Sealer After Power Washing
Think of your driveway like one big sponge. It soaks up everything! An effective pressure wash cleans the pores of your concrete. Make sure to apply concrete sealer after pressure washing.
Polymeric Sand has many benefits, however, the biggest drawback is that it can be easy to mess up, especially if you don't follow the manufacturer's instructions.
Polymeric sand is the most popular and useful filler used under brick pavers. It is a mixture of fine sand, adhesive and is most widely used in paver joints. Typically, polymeric sand lasts for up to 10 years. But if you use high-quality polymeric sand, it can last for approximately 15 years.
The Problem With Polymeric Sands & Water Mitigation
Most polymeric sands don't drain water which meant small stones were used to fill the joints between the interlock. For driveways, this solution isn't a big issue but near a pool or patio, people prefer the smooth uniformity of polymeric sand.