The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.
How Tight Should a Safety Cover Be? Safety covers should be drum-tight, with only a slight deflection in the middle. When covers are too loose, leaves can blow under easily, and a high water level in springtime quickly traps leaves and turns your cover into a giant tea bag.
It sits very close to the top of the water, and below the lip of the pool. Solar Pool Cover: A blanket made up of bubbled plastic (it looks like bubble wrap), it sits directly on top of the water and concentrates solar energy to heat the water below it.
Ideally, 2 inches of water is acceptable on top of your cover simply because it aids in keeping the cover on the pool when it gets windy however, having excess water on top of the cover can cause severe damage to your pool structure as well as to the water quality underneath the cover.
Consider that water on a 24' round pool weighs about one ton per inch deep. So, six inches of water on your pool cover, weighing over 6 tons, can put a fair amount of strain on the cover and pool. As stress from water weight on your cover increases, first, your cover starts to stretch.
Covering a pool when it is not in use is the single most effective means of reducing pool heating costs. Savings of 50%–70% are possible. Pool covers on indoor pools not only can reduce evaporation but also the need to ventilate indoor air and replace it with unconditioned outdoor air.
Possibly the most dreaded step of the process is removing the pool cover. Before you can remove the cover, you have to remove the water that's on top of the cover. While you can try siphoning the water off with a garden hose or scooping it with a bucket, a much more effective method is to use a pool cover pump.
Keep Water off the Top of your Solar Pool Blanket
The water on top of your solar pool cover will evaporate and pull the heat through the blanket and actually cool the pool. Thus after it has rained, you need to roll up the solar pool blanked and drain the rain water off.
When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
Safety cover sagging is okay, well in most cases. It is not the safety-cover that supports the snow and ice. It is the water underneath your cover that helps it and keeps it from sagging too much. Whoever sold you the cover should have warned you or directed you to read the directions.
We strongly recommend using an air pillow under your winter cover. The first reason to install a winter cover air pillow is to protect your pool from expanding ice. When you don't use an air pillow, the cover sits right on top of the water and the ice will want to expand outwards.
After it rains, you should remove standing water as soon as possible. To do this, you'll want to use a siphon or a water pump. An automatic pool cover pump is one of the most useful pool supplies in New Haven County, CT because it can remove standing water from your cover without you needing to do the work.
Is It Safe To Run The pool Pump With The Pool Cover On? It is safe to run the pool pump and filter with a swimming pool cover on. The pool cover doesn't in any way stop or hinder the pool pump from circulating the water or carrying out its function.
We recommend it, yes. A pool cover does much more than just cover your pool in the winter. It can keep heat in your pool, keep leaves out of the pool, and save your chemicals and water from evaporating.
A covered pool conserves water by losing less due to evaporation. This means you won't be filling up your pool as often as you did when you were cover-less. If you live in a drought area, using less water is the smart way to go.
So while a solar cover won't actually 'turn your pool green', it will warm your water by up to 8 degrees, so if the other conditions are right, adding a solar cover can easily accelerate algae growth, very rapidly. You need to get the water balance in your pool right before putting the cover back on.
Tie strong string or thin rope to both ends of the pillow; it should have grommets on the edges for this purpose. Place the pillow in the center of the pool. Secure the other ends of the strings to the edge of the pool to keep the pillow in place.
You may have heard pool owners recommend alternatives to pool air pillows, such as tire tubes, yoga balls, or regular innertubes.
For example, a vinyl pool cover with maximum sun exposure may only last a year while an automatic pool cover may stay viable for 3 to 7 years.
Sometimes it can be hard to keep pool covers in place. High winds, heavy rain, and even snow can cause them to fall into the pool. One thing you don't want to do is place anything on top of the cover in an attempt to keep it in place. If you do, you can risk causing it to slip into the pool as well.
Some of the causes of pool covers sagging include snow on the pool cover, dirt and debris on the pool cover, a low water level, and a poor installation of the pool cover. A torn pool cover can also easily sag when the water seeps to the top of the cover.