Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
Add Baking Soda or Soda Ash
Baking soda and soda ash are two solutions you can add to water to raise a pool's pH. You can add either one directly to the pool. For the best results, walk around the edge while you dump the chemicals to distribute them evenly. Add 1.5 pounds of baking soda per 10,000 gallons of water.
The acceptable range for pool water pH is 7.2-7.8, and the ideal pool pH is between 7.4 and 7.6. Water below a pH of 7.2 is too acidic, stinging your eyes, damaging pool liners and corroding equipment. Water above 7.8 is too alkaline and can cause skin irritation, cloudy water, and scale buildup.
And there are two different chemicals you can use to raise the pH in your pool: Baking Soda aka sodium bicarbonate (sold as Alkalinity Increaser in pool stores). Soda Ash aka sodium carbonate (sold as pH Increaser in pool stores).
Baking Soda is Sodium Bicarbonate
If your pool water alkalinity is lower than it should be, one way to increase it is to go to your local pool supply store and pick up a bottle of "alkalinity increaser." But did you know alkalinity increaser is just sodium bicarbonate?
“Adding too much baking soda to a pool will cause the alkalinity to rise,” Vernon says. Anything above 120 ppm is too high. And over-alkaline water, he says, “can create scale build-up and cloudy water.” So as you add baking soda to adjust pH and alkalinity, remember to be patient.
As per standard, 1.25 pounds of baking soda is enough to raise the PH level of a 10,000-gallon pool by 10ppm, so to achieve a 100ppm alkalinity, you would need 12.5 pounds of baking soda for a 10,000 gallon of pool water.
pH Down comes in two forms: liquid acid or dry acid. Changes in the pH of pool water can be caused by many factors but one of the most significant causes is the sanitizer used. Since the sanitizer is the most frequently added chemical in pools, it can have a powerful impact on pH and overall water quality.
High Total Alkalinity over 180 ppm can cause some resistance to pH change. Adding pH Increaser can also raise Total Alkalinity, compounding the problem. Make repeated adjustments of lowering Alkalinity and then raising pH until both come into proper range, testing the water each time before adding more chemicals.
A: pH enhancers and increasers often start working within 20 minutes. Add a tiny quantity of the increaser into your pool, leave the cover off, activate the pumps, and let the water circulate. Test the pH level after 20 minutes.
Too low a pH has a significant influence on the effect of the chlorine. If the pH level is too low, you will have to add a large amount of chlorine to ensure proper disinfection of the water. A good pH level will therefore also benefit your wallet.
Most Algae Grows in High-pH Environments
Most types of algae typically enjoy higher pH levels, ranging from 8.2 to 8.7. Once algae starts growing, it can further raise the pH level in your pool and cause more algae growth.
Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. Not only is it bad for your health, but it can be bad for your pool due to the increase in chlorine. High chlorine levels decrease the pH of your pool's water, making it more acidic.
Shocking the pool will lower the pH, whether you use chlorine-based shock (calcium hypochlorite), or the non-chlorine kind (potassium peroxymonosulfate). Rain picks up impurities in the air, raising the rainwater acidity and lowers the pH.
pH changes will happen naturally. Simply swimming and splashing around in your pool will break up the CO2 and cause the pH to rise. This is why it's so important to check the pH levels of your pool regularly. pH may also increase when chemicals are introduced into your pool.
When chlorine levels are too high, the water's pH will start to decrease, which can eventually lead to corrosion. However, liquid chlorine has a pH of 13 and can cause the water's pH to increase.
Aim for a pH level of between 7 and 7.6. If the water pH is higher than 8, anyone who swims in the pool is at risk of skin rashes, while a pH of lower than 7 can sting swimmers' eyes. Some of the many factors that can affect your pool's pH level include heavy rain, the number of swimmers in the pool and chemicals.
Wait for the soda to dissolve
You will need to wait 6 hours to let the baking soda thoroughly dissolve into the pool water.
Likewise, a low pH can also cause cloudy water due to increased bacteria and algae. In this case you'll want to use a pH increaser to raise the level to at least 7.4. It's also important to keep an eye on total alkalinity.
Mixing in 1 tsp (4 g) of baking soda with 250 ml of water will raise its pH, making it more alkaline. Milk of Magnesia Milk of magnesia is an alkaline suspension, which means it causes neutralization when it encounters anything acidic. This makes this substance great for water on the more acidic side.
The pool aerator can't change the pH levels of the pool water on its own. However, if you add muriatic acid, a chemical that aims to lower the alkalinity of the water and turn on the aerator, the pH levels will increase.
Whenever pH drops below 7.2, add 3- 4 lbs. of ARM & HAMMER™ Baking Soda per 10,000 gallons of water to raise the pH. If after a day or so, the pH has not stabilized and drops below 7.2 again, add another 4 lbs. of ARM & HAMMER™ Baking Soda per 10,000 gallons of water.
Borax acts as an effective pH buffer and helps prevent algae growth in swimming pools. Plus, it will leave your water looking sparkly and feeling soft.