If you're in a kitchen, and you're doing the countertop-to-upper-cabinet-18”-high-backsplash, it's best not to wrap that around to the side wall if you don't need to. As I always say... Transitioning materials on an inside corner is always best.
In kitchens, backsplashes are typically installed on the walls above countertops, sinks and stoves. Backsplashes can also be installed in bathrooms on the walls above vanities.
That is why experts don't recommend having side backsplashes unless they are needed. Backsplashes exist for two reasons. First, it protects the wall from damage caused by splattering liquid that comes either from a water source or the cooking range. Second, it creates an accent to a lame kitchen wall.
There are no "rules" per se, but I always think that drywall between the counter and the upper cabinets looks too naked. Also, tile and/or solid surface material on the backsplash is easier to wipe down than painted drywall.
Backsplashes need to line up with the upper cabinet.
Align the tile backsplash with the upper cabinet. It doesn't have to align with both although that would be nice! Usually the end of the backsplash tile, if aligned with the uppers, will die ON TOP OF the countertop below.
Leave the Edge Alone
Complete the edge by applying a piece of painter's tape to the wall next to the tiles. Squeeze a thin line of caulk down the outside edge of the tiles where they meet the wall. This blends the tiles into the wall, giving it a clean, finished look.
The bottom of the upper cabinets, the bottom of a window, or the range hood are common lines to use as a guide for where to end your backsplash. Too many lines can make the room feel disjointed; continuing existing lines keeps the look unified and clean.
Step 1: Lay Out Your Backsplash Tile Design
If you are doing a straight wall—like my laundry nook, it's best to start at the center and work your way outward. However, if you are doing a corner, it's better to start in the corner and work your way out.
You need a backsplash behind the stove to protect from grease and cooking splatter that could damage the surface behind the stove. The backsplash should be made of durable, nonabsorbent, and easy to clean material that will not discolor easily.
Backsplashes should go behind the stove and between the countertop and the bottom of the upper cabinets, but not behind the fridge. The backsplash should be wherever there will be food and water splatter, but not where it can't be seen.
Side splashes depend on the people using the vanity. If you only do handwashing then you could probably live without one. But if you splash a lot then your wall paint is going to start to peel. You only need one.
First, during tile installation, leave a small space between the tiles and the wood surface or countertop… no more than 1/8 of an inch.
When installing tile, leave a 1/8 inch (3 mm) gap between tile and cabinets. Fill the gap between the tile and cabinet with color-matched caulk. Then, smooth it with this caulking tool.
Skinny backsplashes are out of style, we are happy to report. A ceramic tile or glass backsplash that stretches from counter to cabinets is much easier to keep clean, and is more likely to catch spills and splatters.
A standard backsplash is typically 4 inches high from the countertop. A full backsplash comes as high as you need, most homeowners have it all the way up to the height of the kitchen cabinets.
According to our friends at hunker.com, a standard backsplash measures four inches up from the your countertop surface. In most cases, it is an additional piece of the same material that you select for your countertops.
Getting Started
It's always advisable to start tiling your grid in the centre of the wall, as it's easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Make a mark directly in the middle of the wall above the countertop. This is where you will center the first tile to start the backsplash project. If the countertop is tiled, locate the tile that is in the middle of the counter and use that as your starting point.
Most of the tiles will need to be cut to fit the perimeter of the room; starting in a corner allows you to begin the pattern with full tiles on a straight line and move evenly into the room. In this case, beginning in the center may make it more difficult to get the pattern moving evenly.
Matching Colors
For example, cream, beige, brown or gray backsplash tile often matches granite, wood or neutral-color synthetic countertops. This is advantageous if you have small appliances or decorative accessories in colors such as such as red, black or turquoise that contrast with your tile.
The only time tile trim may not be needed is when the tile meets flush against other surfaces like wall corners or floor edges. Continuous tile designs can also be used instead of installing tile trim (but the tile edges should be glazed to remove rough, sharp edges).
Use a bullnose blade on a wet-saw to achieve an evenly rounded profile on the edges. Cut the tiles to size first, then mark the edges to be rounded on the back of each tile with chalk or with a spot of tape on the front. Practice your bullnose technique on tile scraps until you get the hang of it.
The purpose of a backsplash is primarily functional. It protects the wall behind the sink against water damage from inadvertent splashing. In the kitchen, backsplashes cover other parts of the countertop beside the sink area.