Anchor the new mailbox post with concrete: Here's how to put in a mailbox post easily. Insert the new post into the hole, making sure the top is at the required height. Prop the post up with secure supports on all sides, making certain that it is level and won't shift after the concrete is poured.
Dig a hole larger than the post and put gravel into the hole until the post sits on top of the gravel at the right height. Then add gravel around the post a little at a time and keep packing it in.
No concrete needed. Bury an empty 6 or 8 inch tube two feet deep, and flush with the ground. Compact the soil around it. Then center and level your mailbox within the tube, and fill around the post with sand. Tamp the sand down too a bit, then cover lightly with sod.
If the post is still standing, wiggle it to see if it's stable. If it's sturdy, and if the mailbox is intact, you might just need to screw the box back onto the post. Check the top of the post and bottom of the mailbox. If the metal bracket that connected them is damaged, you'll need to replace it.
Once the concrete has set and the post is secure, it's time to attach the mailbox. Most mailbox posts come with pre-drilled holes for easy installation. Align the mailbox with these holes and use a drill and screws to secure it to the post.
Anchor the new mailbox post with concrete: Here's how to put in a mailbox post easily. Insert the new post into the hole, making sure the top is at the required height. Prop the post up with secure supports on all sides, making certain that it is level and won't shift after the concrete is poured.
Position your mailbox 41″ to 45″ from the road surface to the bottom of the mailbox or point of mail entry. Place your mailbox 6″ to 8″ back from the curb. If you do not have a raised curb, contact your local postmaster for guidance. Put your house or apartment number on the mailbox.
The USPS will inform you that your mailbox is unserviceable and thereafter they will hold your mail at the local post office for 2 weeks. If you do not fix the mailbox within this time then the post office may/can return the mail as undeliverable and return the letter to the sender.
By applying a Fence Armor Postsaver® Sleeve, you are protecting a mailbox post, just where it needs it the most. The heat-sealed sleeve is water and air-tight, keeping rot, mildew, and fungi at bay. You apply the Postsaver® Sleeves with a heat gun, and they come in single or multi-packs.
Set in Gravel and Concrete
Fill the first three inches up with gravel so the end of the post doesn't come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.
Most mailbox posts will need 2 bags of Quikrete to set, but before starting use this calculator to determine how many bags you need!
Depending on your local municipality, using concrete mailbox posts may be may prohibited. The reason for this is that concrete posts pose a safety hazard to motorists and their passengers. If a car strikes a concrete post, the driver or passengers could be seriously injured.
Dig deep enough that the height of your mailbox above the ground is around 42 inches. Do not dig deeper than 24 inches. Put a shovel full of gravel in the bottom of the hole.
Backfilling with Gravel and Soil. Fill the first few inches of the hole with gravel. This aids in drainage, keeping wood posts dry and preventing rot. After the gravel, backfill the hole with the dug-up soil, tamping down every few inches to eliminate air pockets and ensure soil compaction.
If you want your mailbox to hold up to shifting temperatures, groundwater, and seasonal fluctuations, concrete will help it last longer. To set your mailbox post in concrete, prepare the ready-mix cement per the manufacturer instructions.
One of the simplest methods is simply attaching something to the bottom of the post before putting it in the ground. One method is to nail a piece of wood to the bottom of the post. This device is often called a deadman and is shown in Figure 1.
You basically just “screw” the anchor into the ground using a 20″ crossbar for leverage, which is included with the kit. After the anchor is screwed into the ground, you set your wood post on the bracket and attach it using 5 lag bolts.
Birdhouses: Attach a birdhouse to your mailbox post to provide a cozy nesting place for your feathered friends. Sculptures: Add a unique and eye-catching sculpture to your mailbox area to showcase your personality and style. Welcome mats: Place a welcome mat under your mailbox to greet your guests and mail carrier.
Post Protector: A Tar Coating Just Doesn't do the Job!
Checks expose non-treated wood allowing decay-fungi a way around preservative protection. Post Protector is a complete, professional system that is lightweight, easy to install, attractive, affordable, & effective.
Start by digging a shallow hole around the perimeter of the mailbox post until the stake moves slightly. Next, wedge the post upright by filling the hole with hardscape materials, such as rocks, sand, gravel, or a concrete mix, and compact the hardscape material firmly into the hole.
If you know of someone who committed an act of mailbox vandalism, report it to the Postal Inspectors. If you see someone actively tampering with a mailbox, immediately report it to the police. Talk to your children about the consequences of damaging mailboxes.
Mailboxes are considered federal property, protected by rules set by the United States Postal Service. Because of this, only authorized persons (mail carriers and the owner of the property of the mailbox) are legally allowed to place things into and retrieve items from the mailbox.
Because it's your land and it is affixed to your land, it legally belongs to you. Thus, if he refuses to move the mailbox, you can remove it from your property yourself. You don't need to call a lawyer or the post office unless the post office put it there rather than your neighbor or the builder.
1. A Local Custom or Practical Joke. In some areas or communities, placing a small rock in someone's mailbox is simply a local tradition – a way of saying hello or playing a harmless prank. It could be a quirky method to foster communication or a sign of friendship from a neighbor.