Vinegar is a harsh chemical that can damage the surface of the brick, concrete, pavers, etc. It may look like an effective remedy against mold and dirt, but it may weaken the integrity of the surface structure.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
A solution of household bleach diluted 10:1 with water (10 parts water) can be used to remove many types of stains. Some of these include beverage stains, leaf, wood rot, and tobacco stains. Always test a small section of your patio before covering a large area.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Leave the white vinegar for 1 hour or so to let the vinegar work its way into the paver slabs. Spray the surface with soap and water, then scrub off. Rinse with warm water, then let dry. You may repeat the process if there are stains left.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
You can't cover your patio with copper sheets, but you can spray on a liquid solution of copper that will soak into the top surface of the concrete pavers. This copper will stop the growth of the pesky green and black organisms in their tracks. The easiest way to apply the copper is to buy copper sulfate crystals.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Properly Cleaning Pavers
Per the Simple Green website, you'll want to mix one cup of water for every ounce of Simple Green being used. PRO TIP: Don't forget to spot test the mixed solution in a hidden area PRIOR to cleaning the entire surface. Next, pour the solution over the pavers and let it sit for 1-2 minutes.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Depending on the material of the paver (non-coloured concrete is safe), CLR may be suitable. Always spot test in an inconspicuous area first. Make sure the pavers are not coloured, stamped, sealed or coated.
Vinegar is acidic and will eventually kill most broadleaf weeds, but the acid will kill the leaves before reaching the root system, and the weeds may grow back quickly. For longer-lasting removal, mix 1 cup of table salt with 1 gallon of vinegar. Salt dries out the weed's root system.
Glyphosate, the ingredient in Roundup and other products, is translocated from the leaves to the roots of a weed. Vinegar is not translocated. It is true that 5% vinegar (acetic acid) will kill young, tender weeds but it does little damage to established weeds.
While vinegar solutions may kill the top growth within a few hours, it might take days for the roots to die off. Boiling water is an effective way to kill weed roots. Try using a tea kettle to help direct the boiling water to the roots.